We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat rectangular lithium-polymer battery with gold contacts, 61.5 by 33.13 by 6.75 mm

CameronSino

CameronSino 1700mAh 3.7V Li-Polymer Battery for Philips Pronto TSU-9400

SKU CH-8Q8W-N5W0R

Replacement Li-Polymer cell delivers 1700mAh at 3.7V for Philips Pronto TSU-9400 remotes

  • Replaces original 1700mAh 3.7V battery for Philips Pronto TSU-9400
  • Matches part numbers 530065, C29943 and PB9400 for exact fit
  • Li-Polymer cell delivers 6.29Wh in 61.50 x 33.13 x 6.75mm form
  • Certified to ISO9001, RoHS and CE quality standards
  • Brand-new condition ensures full capacity from first charge

Direct replacement for Philips Pronto TSU-9400

This 1700mAh lithium-polymer cell operates at 3.7 volts and delivers 6.29Wh of energy. It matches the original BP9400 PB9400 and C29943 part numbers for the Philips Pronto TSU-9400 remote control. The pack is built to ISO9001 RoHS and CE quality standards.

Certified safe chemistry and fit

RoHS approval confirms the cell contains no restricted hazardous substances. CE marking and ISO9001 certification verify that manufacturing meets recognised safety and quality benchmarks. These credentials give assurance that the replacement will charge and discharge reliably inside the original housing.

1700mAh capacity for typical daily use

The 6.29Wh rating supports normal remote-control operation between charges. Heavy backlight use or continuous infrared transmission will reduce run time compared to light intermittent pressing. The 61.50 by 33.13 by 6.75mm form factor fits the factory battery compartment without modification.

Highlights

  • Replaces original 1700mAh 3.7V battery for Philips Pronto TSU-9400
  • Matches part numbers 530065, C29943 and PB9400 for exact fit
  • Li-Polymer cell delivers 6.29Wh in 61.50 x 33.13 x 6.75mm form
  • Certified to ISO9001, RoHS and CE quality standards
  • Brand-new condition ensures full capacity from first charge

Specifications

BrandVINTRONS

Questions about this item

How often will the 1700mAh Li-Polymer cell need replacing under normal use?

A 3.7V Li-Polymer pack of this capacity typically delivers several hundred full charge cycles before capacity drops noticeably; expect replacement when run-time falls below your needs.

What limits runtime first during continuous operation of the TSU-9400 remote?

The 6.29Wh capacity sets the hard ceiling; sustained backlight and RF use will drain the 1700mAh cell faster than standby, so plan for a recharge once that energy is spent.

Does the battery get hot or draw high current when the remote runs all day?

At 3.7V the cell runs cool under the TSU-9400's modest load; no active cooling is needed and heat stays low during extended daily use.

More in Cell Phone Batteries

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.