Cameron Sino XBATTLAZ620 21.6V 1800mAh 38.88Wh Vacuum Battery
Replacement lithium-ion battery for select Shark cordless vacuums, 21.6 V 1800 mAh 38.88 Wh with built-in protection
- Specifications155.50 x 68.70 x 34.40
- Typelithium_ion
- Battery Pack155.50 x 68.70 x 34.40
- Battery Typelithium_ion
- Battery Capacity1800mAh / 38.88Wh
- Battery Voltage21.60 volts
- 6 V 1800 mAh 38.88 Wh powers longer cleaning sessions
- 50 x 68.70 x 34.40 mm fits Shark AW201 HydroVac Cordless Pro XL WD200 WD201 series
- Lithium-ion chemistry with overcharge over-discharge over-voltage short-circuit protection
- Fully decoded chip works like the original battery
- ISO9001 RoHS CE certified for safety and durability
Direct Replacement Battery
The Cameron Sino XBATTLAZ620 is a lithium-ion battery built to match the original specifications for Shark AW201, HydroVac Cordless Pro XL, WD200, WD200C, WD201, WD201C, WD201QAQ, and WD201QGY models. It delivers 21.6 volts and 1800mAh capacity in a 155.50 x 68.70 x 34.40mm form factor. The integrated decoded chip communicates with the vacuum exactly like the factory unit. Buyers needing a different voltage or connector will not find it here.
Ready-to-Install Pack
The battery arrives with protective foam packaging that guards the cells during transit. No additional tools, cables, or software are included in the box. Installation relies on the existing latch and connector in the vacuum; the supplier notes that many online videos demonstrate the straightforward swap. Users who expect a charger, mounting hardware, or a multi-pack must source those separately.
38.88Wh Runtime Envelope
At 38.88Wh the pack provides a direct capacity match for the original battery, supporting typical whole-home cleaning sessions on a single charge. Runtime scales with power mode, floor type, and attachment load, so maximum suction on thick carpet will deplete the cells faster than eco mode on hard floors. The battery reaches peak performance after two or three full charge cycles. Households needing extended runtimes beyond a single pack’s capacity will require a second battery for swapping.
Highlights
- 6 V 1800 mAh 38.88 Wh powers longer cleaning sessions
- 50 x 68.70 x 34.40 mm fits Shark AW201 HydroVac Cordless Pro XL WD200 WD201 series
- Lithium-ion chemistry with overcharge over-discharge over-voltage short-circuit protection
- Fully decoded chip works like the original battery
- ISO9001 RoHS CE certified for safety and durability
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | AW201, HydroVac Cordless Pro XL, Matrix Plus 2-in-1 Robot Vacuu, WD200, WD200C, WD201, WD201C, WD201QAQ, WD201QGY, WD2KT1, WD2UPG1 |
| Part Number | XBATTLAZ620 |
| Specifications | 155.50 x 68.70 x 34.40 |
| Type | lithium_ion |
| Battery Pack | 155.50 x 68.70 x 34.40 |
| Battery Type | lithium_ion |
| Battery Capacity | 1800mAh / 38.88Wh |
| Battery Voltage | 21.60 volts |
Questions about this item
How long until the 1800mAh lithium-ion pack needs replacing?
A new lithium-ion pack reaches peak capacity after 2 or 3 full charge cycles; typical service life is several hundred cycles before runtime drops noticeably.
What limits runtime during a long cleaning session?
The 38.88Wh capacity at 21.6V sets the energy ceiling; sustained high-power suction will drain the pack faster than light use.
Does the battery get hot or noisy when the vacuum runs all day?
The pack has over-voltage, short-circuit and thermal protection; it runs silently and stays within safe temperature limits during continuous operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
iRobot 4910 robotic vacuum filter 3-pack
- Roomba 3pack Filter…
- 3 pack of replaceme…



