Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00999735BTC
In stock
Cameron Sino Wiper i130S i-STAT 300-G AN-500 700mAh 9.0V Nickel-Zinc Battery
700 mAh nickel-zinc replacement battery for Abbott AN-500, i-STAT 1 and i-STAT 300-G analysers
- Specifications52.42 x 38.10 x 30.00
- Typenickel_zinc
- Battery Pack52.42 x 38.10 x 30.00
- Battery Typenickel_zinc
- Battery Capacity700.00 milliamp_hours
- Battery Voltage9.00 volts
- Direct replacement for Abbott i-STAT 300-G and AN-500
- Nickel-zinc chemistry delivers 700mAh at 9.0V for medical use
- Compact 52.42 x 38.10 x 30.00mm fits original battery bay
- Certified to ISO 9001, RoHS and CE for safety compliance
- Built-in protection against overcharge, over-discharge and short circuit
Compatible Replacement Battery
This nickel-zinc replacement battery fits Abbott AN-500, i-STAT 1 and i-STAT 300-G analysers. It matches the original 06F23-55 part number and delivers 700mAh at 9.0 volts. Medical facilities and technicians can install it using widely available online guides. The pack measures 52.42 by 38.10 by 30.00 millimetres and weighs 102.4 grams.
Sustained Performance in Medical Use
The 6.30 watt-hour capacity supports extended monitoring sessions without frequent recharging. A fully decoded chip communicates with the host device exactly as the original battery does. Performance stabilises after two or three complete charge and discharge cycles. Overcharge, over-discharge, over-voltage and short-circuit protection circuits maintain safe operation throughout each shift.
Thermals Noise and Power Draw
Nickel-zinc chemistry runs cool during typical indoor use and produces no audible noise. The battery is rated for storage temperatures up to 60 degrees Celsius (140 degrees Fahrenheit). No fan or active cooling is required in the host analyser. Efficient charge acceptance keeps power draw low while the unit is docked.
Highlights
- Direct replacement for Abbott i-STAT 300-G and AN-500
- Nickel-zinc chemistry delivers 700mAh at 9.0V for medical use
- Compact 52.42 x 38.10 x 30.00mm fits original battery bay
- Certified to ISO 9001, RoHS and CE for safety compliance
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | cameron sino |
|---|---|
| Model | Wiper i130S i-STAT 300-G AN-500 |
| Part Number | Wiper 06F23-55 |
| Specifications | 52.42 x 38.10 x 30.00 |
| Type | nickel_zinc |
| Battery Pack | 52.42 x 38.10 x 30.00 |
| Battery Type | nickel_zinc |
| Battery Capacity | 700.00 milliamp_hours |
| Battery Voltage | 9.00 volts |
Questions about this item
How much heat does the 700mAh nickel-zinc cell generate during continuous use in an i-STAT 300-G?
The 9.0V pack is rated at 6.30Wh and fits the original 52.42 x 38.10 x 30.00mm cavity, so thermal output matches the Abbott 06F23-55 specification.
What must I already own to install this replacement battery in my analyser?
You need the Abbott AN-500, i-STAT 1 or i-STAT 300-G handheld and its original battery compartment — no extra tools or chargers are required.
Will the 102.4g Cameron Sino pack work alongside the original charging dock I kept from my older i-STAT 1?
Yes, the fully decoded chip communicates with the existing dock exactly like the factory 06F23-55 cell, so charge cycles behave identically.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
