Cameron Sino Wiper i130S 2600mAh 14.4V 69.00x37.40x37.00mm
Replacement lithium-polymer battery for Airrobo P20 vacuums, 2600 mAh at 14.4 V, measuring 69.00 x 37.40 x 37.00 mm
- Specifications69.00 x 37.40 x 37.00
- Typelithium_polymer
- Battery Pack69.00 x 37.40 x 37.00
- Battery Typelithium_polymer
- Battery Capacity2600 milliamp_hours
- Battery Voltage14.4 volts
- Compatible replacement for Airrobo P20 vacuum
- 2600mAh capacity at 14.4V for reliable run time
- Compact 69.00 x 37.40 x 37.00mm lithium-polymer pack
- Built-in overcharge, over-discharge and short-circuit protection
- ISO9001, RoHS and CE certified for safety
Replacement Battery for Airrobo P20
This lithium-polymer pack is a direct replacement for the Airrobo P20 robotic vacuum. It delivers 2600mAh at 14.4V and fits the exact 69.00 x 37.40 x 37.00mm cavity. The fully decoded chip communicates with the original electronics without modification.
Pre-installed Protection and Packaging
The cell includes overcharge, over-discharge, over-voltage and short-circuit safeguards built into the pack itself. A shock-absorbing foam insert protects the battery during transit. No separate charger, cable or software is bundled with this unit.
Verify Model and Part Number Before Ordering
Confirm your vacuum shows model P20 and that the original battery carries part number 91069. The connector must match the factory layout for a secure fit. Performance reaches its peak after two or three full charge and discharge cycles.
Highlights
- Compatible replacement for Airrobo P20 vacuum
- 2600mAh capacity at 14.4V for reliable run time
- Compact 69.00 x 37.40 x 37.00mm lithium-polymer pack
- Built-in overcharge, over-discharge and short-circuit protection
- ISO9001, RoHS and CE certified for safety
Specifications
| Brand | cameron sino |
|---|---|
| Model | Wiper i130S |
| Part Number | Wiper 91069 |
| Specifications | 69.00 x 37.40 x 37.00 |
| Type | lithium_polymer |
| Battery Pack | 69.00 x 37.40 x 37.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 2600 milliamp_hours |
| Battery Voltage | 14.4 volts |
Questions about this item
How many charge cycles before the 2600mAh lithium-polymer pack needs replacing?
The manufacturer certifies the pack to ISO9001, RoHS and CE standards; typical lithium-polymer cells in daily vacuum use last several hundred full cycles before capacity falls off.
What limits run-time during a whole-house cleaning session?
The 37.44 Wh capacity at 14.4 V sets the energy ceiling; once that is depleted the vacuum stops until recharged.
Does the battery get hot or noisy when the robot runs for hours?
Lithium-polymer chemistry runs silently and stays cool under normal loads; the built-in protection circuit prevents over-voltage and short-circuit heating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



