We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, blue shrink wrap, two 18650 cells, connector lead

Cameron Sino Vibe INR18650 2S1P 2600mAh 19.24Wh cell phone battery

SKU CH-M373-F8Z6G

Replacement lithium-ion battery for Vibe speakers, 2600 mAh capacity with 7.4 V output and built-in protection circuit

  • Capacity2600mAh / 19.24Wh
  • Weight234
  • Replacement battery designed for Vibe speaker models
  • 2600mAh capacity delivers 19.24Wh of runtime
  • 4V lithium-ion chemistry with fully decoded chip
  • Compact 131.50 x 20.00 x 18.50mm form factor
  • Built-in overcharge, over-discharge and short-circuit protection

Compatible replacement battery for Vibe speaker

This lithium-ion cell pack is built to match the original Vibe speaker battery using an INR18650 2S1P configuration. It delivers 2600mAh capacity at 7.4 volts for 19.24Wh total energy. The fully decoded chip ensures the speaker recognises the pack and reports charge status correctly. Designed for owners who need a direct swap without modification.

Certified build with protective foam packaging

Each unit carries ISO9001, RoHS and CE certification and is tested for overcharge, over-discharge, over-voltage and short-circuit protection. Physical dimensions are 131.50 by 20.00 by 18.50 millimetres and the pack weighs 94 grams. Shock-absorbing foam surrounds the battery during transport to prevent damage. Installation videos are widely available online for straightforward fitting.

2600mAh capacity decides runtime

The single figure that determines whether this pack meets your needs is the 2600mAh rating at 7.4 volts. If your original battery specifies a different capacity or voltage, this unit will not provide the expected playtime. Buyers who need longer runtime between charges should look for a higher-capacity alternative. The pack is rechargeable and rated for normal cycle life after two to three full charge cycles.

Highlights

  • Replacement battery designed for Vibe speaker models
  • 2600mAh capacity delivers 19.24Wh of runtime
  • 4V lithium-ion chemistry with fully decoded chip
  • Compact 131.50 x 20.00 x 18.50mm form factor
  • Built-in overcharge, over-discharge and short-circuit protection

Specifications

BrandCameron Sino
ModelVibe
Part NumberINR18650 2S1P
Capacity2600mAh / 19.24Wh
Weight234

Questions about this item

What voltage does the INR18650 2S1P battery deliver and what capacity limit does that set?

The 2S1P configuration provides 7.4 V with a 2600 mAh capacity, yielding 19.24 Wh of energy for the Vibe speaker.

Will the 131.50 x 20.00 x 18.50 mm pack fit my Vibe speaker's battery bay?

The pack measures 131.50 mm long, 20.00 mm wide and 18.50 mm thick, matching the original Vibe speaker compartment.

How do I install the replacement battery and which step is often missed?

Disconnect the old pack, connect the new battery's decoded chip connector firmly until it clicks, then reassemble; the step most skipped is verifying the connector is fully seated.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.