Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00996236BTC
In stock
Cameron Sino Standard Battery for Bticino 4216 4280 900mAh 7.4V
Nickel-zinc 900 mAh 7.4 V replacement battery fits Bticino 4216 and 4280 models
- Specifications1
- Typenickel_zinc
- Battery Pack1
- Battery Typenickel_zinc
- Battery Capacity900.00 milliamp_hours
- Battery Voltage7.40 volts
- Compatible with Bticino 4216 and 4280 models
- 900 mAh capacity delivers 6.66 Wh of energy
- Nickel-zinc chemistry at 7.4 V for alarm systems
- ISO 9001, RoHS and CE certified for safety
- Fully decoded chip works like the original battery
Direct Replacement for Bticino 4216 and 4280
This nickel-zinc battery pack delivers 900mAh at 7.4V for Bticino alarm models 4216 and 4280. It matches the original part number 4238 and includes a fully decoded chip so the system recognises it immediately. Installers and homeowners can swap the old cell without special tools.
Low Self-Discharge Chemistry Runs Cool
Nickel-zinc cells generate minimal heat during normal standby and alarm cycles, keeping the enclosure temperature stable. The pack draws only the current the panel requires, so power consumption stays low and silent. No active cooling or ventilation is needed in typical indoor installations.
900mAh Capacity Sets the Runtime Limit
The 900mAh rating determines how long the panel operates during a mains outage. Systems with higher current draw or longer backup requirements will exhaust this pack sooner. Verify the panel's standby and alarm current before relying on this capacity.
Highlights
- Compatible with Bticino 4216 and 4280 models
- 900 mAh capacity delivers 6.66 Wh of energy
- Nickel-zinc chemistry at 7.4 V for alarm systems
- ISO 9001, RoHS and CE certified for safety
- Fully decoded chip works like the original battery
Specifications
| Brand | cameron sino |
|---|---|
| Model | Castles V3 VEGA3000-3G Dejavoo Z9 V3 Z9 Blue |
| Part Number | Castles IP604355-2P Dejavoo IP604355-2P |
| Specifications | 1 |
| Type | nickel_zinc |
| Battery Pack | 1 |
| Battery Type | nickel_zinc |
| Battery Capacity | 900.00 milliamp_hours |
| Battery Voltage | 7.40 volts |
Questions about this item
How do I install the 7.4 V 900 mAh nickel-zinc battery in a Bticino 4216 alarm panel, and which step is most often missed?
Power down the panel, open the battery compartment, disconnect the old pack, connect the new battery's plug ensuring the polarity matches, close the cover, then power up; the step most often missed is verifying the connector is fully seated before closing the case.
What maintenance or replacement will the 900 mAh nickel-zinc battery need over its service life?
The battery requires no routine maintenance; after roughly 2–3 full charge-discharge cycles it reaches peak capacity, and it should be replaced when runtime drops below the alarm system's minimum backup requirement.
What is the first limit that appears when the 7.4 V 900 mAh pack is used continuously in a Bticino 4280 device?
The 6.66 Wh capacity is the limiting factor; under sustained load the pack will deplete to its cutoff voltage, ending backup power until the mains supply recharges it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
