Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.009944BTC
In stock
Cameron Sino Standard Battery for BM7 Vet Elite 5200mAh 10.8V 56.16Wh
Lithium-polymer replacement battery for the BM7 Vet Elite, 5200 mAh, 10.8 V, 56.16 Wh
- Specifications110.00 x 66.00 x 19.00
- Typelithium_polymer
- Battery Pack110.00 x 66.00 x 19.00
- Battery Typelithium_polymer
- Battery Capacity5200.00 milliamp_hours
- Battery Voltage10.80 volts
- 5200 mAh capacity powers the BM7 Vet Elite for extended monitoring sessions
- 8 V lithium-polymer chemistry matches the original voltage specification
- 110 x 66 x 19 mm form factor fits the device battery compartment precisely
- Fully decoded chip enables plug-and-play installation without extra configuration
- Built-in over-charge, over-discharge, over-voltage and short-circuit protection safeguards the pack
Compatible replacement for BM7 Vet Elite
This Cameron Sino lithium-polymer battery replaces the original BM7 Vet Elite pack. It matches the 10.8 V rating and 5200 mAh capacity listed for part numbers 68L335-BIO-S and BM-BAT-7. The cell assembly measures 110.00 x 66.00 x 19.00 mm and uses an ICR18650-based configuration. Veterinary clinics needing a direct swap for the factory unit will find the electrical specifications identical.
Sustained discharge with protection circuitry
The pack delivers its rated 56.16 Wh through a built-in protection circuit that guards against overcharge, over-discharge, over-voltage and short-circuit events. A fully decoded chip communicates with the monitor exactly as the original does, so the fuel gauge and runtime estimates remain accurate during long monitoring sessions. No performance degradation is introduced by the replacement electronics.
Straightforward swap with connector alignment
Installation consists of opening the battery compartment, aligning the plug and pressing the pack into place; many users follow online videos that demonstrate the process in under five minutes. The only common issue is an incompletely seated connector, which causes the monitor to reject the battery on first boot. The package includes shock-absorbing foam to protect the cells during transit. Not suitable for devices that require a different voltage, capacity or form factor.
Highlights
- 5200 mAh capacity powers the BM7 Vet Elite for extended monitoring sessions
- 8 V lithium-polymer chemistry matches the original voltage specification
- 110 x 66 x 19 mm form factor fits the device battery compartment precisely
- Fully decoded chip enables plug-and-play installation without extra configuration
- Built-in over-charge, over-discharge, over-voltage and short-circuit protection safeguards the pack
Specifications
| Brand | cameron sino |
|---|---|
| Model | Econet Monitor Compact 9 21.10-6001 Compact Type 9 Bionet BM7 Vet Elite |
| Part Number | Econet 21.10-6001 ICR18650 22F-032PpTC BM7_032PpTC(3ICR19/65-2) Bionet 68L335-BIO-S BM-BAT-7 68L335-BIO-S |
| Specifications | 110.00 x 66.00 x 19.00 |
| Type | lithium_polymer |
| Battery Pack | 110.00 x 66.00 x 19.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 5200.00 milliamp_hours |
| Battery Voltage | 10.80 volts |
Questions about this item
How much heat does the 10.8 V 5200 mAh lithium-polymer pack generate during continuous use?
Lithium-polymer chemistry runs cooler than older types; the pack stays within normal operating temperature when powering the BM7 Vet Elite all day.
What must I already own for this battery to work in my device?
A BM7 Vet Elite monitor that accepts part numbers 68L335-BIO-S or BM-BAT-7 and a compatible charger for 10.8 V lithium-polymer cells.
Will the replacement pack communicate correctly with the original BM7 Vet Elite battery-management chip?
Yes, the fully decoded chip works just like the original so the monitor reads capacity and health without errors.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
