We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, matte finish, 120.80 x 101.20 x 8.80 mm

Cameron Sino Standard Battery for Aetep AT800/810/820/830/850 5200mAh

SKU CH-JPVT-DN2KA

Replacement battery for Aetep AT800, AT810, AT820, AT830 and AT850 survey equipment, 5200 mAh capacity with built-in protection circuits

  • Specifications120.80 x 101.20 x 8.80
  • Battery Pack120.80 x 101.20 x 8.80
  • Battery Capacity5200.00 milliamp_hours
  • 5200 mAh capacity powers extended field surveys
  • 4 V lithium-ion cell matches original voltage
  • 80 x 101.20 x 8.80 mm form fits AT800 to AT850 models
  • ISO 9001, RoHS and CE certified for regulated environments
  • Built-in protection guards against overcharge, over-discharge and short circuits

Compatible Aetep models

This replacement battery fits Aetep AT800, AT810, AT820, AT830 and AT850 survey and test equipment. It matches original part numbers BE-6398 and BE-6784 with a 5200mAh lithium-ion cell rated at 7.4 volts and 38.48Wh. The pack measures 120.80 by 101.20 by 8.80 millimetres and weighs 210.0 grams.

When to replace the original

Swap the original pack when runtime drops noticeably or the device no longer holds a full charge through a field day. The jump is worth it if the existing battery shows swelling, fails to reach 5200mAh after several cycles, or triggers low-voltage warnings during survey work. A fresh unit restores the certified capacity and protection circuits.

Check before ordering

Confirm the device model number and the original battery part number against the supported list before purchase. Verify the connector orientation matches the compartment and that the 120.80 by 101.20 millimetre footprint fits the battery bay. The pack includes overcharge, over-discharge, over-voltage and short-circuit protection, but requires a quality charger to maintain cycle life.

Highlights

  • 5200 mAh capacity powers extended field surveys
  • 4 V lithium-ion cell matches original voltage
  • 80 x 101.20 x 8.80 mm form fits AT800 to AT850 models
  • ISO 9001, RoHS and CE certified for regulated environments
  • Built-in protection guards against overcharge, over-discharge and short circuits

Specifications

BrandCameron Sino
ModelAT800, AT-800, AT810, AT-810, AT820, AT-820, AT830, AT-830, AT850, AT-850
Part NumberBE-6398, BE-6784
Specifications120.80 x 101.20 x 8.80
Battery Pack120.80 x 101.20 x 8.80
Battery Capacity5200.00 milliamp_hours

Questions about this item

Will the 120.80 x 101.20 x 8.80 mm battery fit the compartment of my Aetep AT800?

Yes, the pack measures 120.80 x 101.20 x 8.80 mm and matches the original dimensions for the AT800, AT810, AT820, AT830 and AT850 models.

What is the installation step users often miss when fitting this 7.4 V pack?

The connector must be fully seated before securing the battery; a loose plug will prevent the decoded chip from communicating with the device.

How many charge cycles does the 5200 mAh lithium-ion cell need to reach full capacity?

The manufacturer states the battery achieves its best performance after two or three complete charge and discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.