Cameron Sino Standard Battery 800mAh 3.7V for Cardo G4 G9 G9x Scala Rider Schuberth C3
Replacement lithium-polymer cell rated 800 mAh at 3.7 V fits Cardo G4, G9, G9x and Scala Rider headsets
- Specifications49.20 x 19.50 x 9.20
- Typelithium_polymer
- Battery Pack49.20 x 19.50 x 9.20
- Battery Typelithium_polymer
- Battery Capacity800mAh
- Battery Voltage3.7 volts
- 800 mAh capacity powers long rides
- 7 V lithium-polymer cell matches original spec
- 20 × 19.50 × 9.20 mm fits Cardo G4, G9, G9x and Scala Rider units
- Built-in over-charge, over-discharge and short-circuit protection
- ISO 9001, RoHS and CE certified for safety
Replacement Battery for Cardo & Schuberth Headsets
This lithium-polymer pack replaces the original cell in Cardo G4, G9 and G9x Scala Rider units as well as Schuberth C3 and C3 Pro communicators. It delivers 800mAh at 3.7 volts and matches the factory dimensions of 49.20 x 19.50 x 9.20mm. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits.
Suits riders needing a direct swap for a worn-out
The cell fits the listed part numbers BAT00002, BAT00004, WW452050-2P and ZN452050PC-1S2P without modification. Buyers whose headset uses a different connector, voltage or physical size should look elsewhere. It is not intended for devices that require a higher capacity or a different chemistry.
Verify the part number on your existing battery
Confirm that the original label shows one of the compatible part numbers above. Check that the connector orientation matches the photograph supplied with the listing. Ensure the installation area can accommodate the stated 49.20 x 19.50 x 9.20mm footprint. A fresh pack reaches full performance after two or three complete charge cycles.
Highlights
- 800 mAh capacity powers long rides
- 7 V lithium-polymer cell matches original spec
- 20 × 19.50 × 9.20 mm fits Cardo G4, G9, G9x and Scala Rider units
- Built-in over-charge, over-discharge and short-circuit protection
- ISO 9001, RoHS and CE certified for safety
Specifications
| Brand | CS Cameron Sino |
|---|---|
| Model | Cardo G4 G9 G9x Scala Rider G9 Scala Rider G4 Scala Rider G9x Schuberth C3 C3 Pro |
| Part Number | Cardo ZN452050PC-1S2P BAT00002 WW452050-2P BAT00004 |
| Specifications | 49.20 x 19.50 x 9.20 |
| Type | lithium_polymer |
| Battery Pack | 49.20 x 19.50 x 9.20 |
| Battery Type | lithium_polymer |
| Battery Capacity | 800mAh |
| Battery Voltage | 3.7 volts |
Questions about this item
Which Cardo headset part numbers must match for this 800 mAh 3.7 V battery to fit?
The replacement fits Cardo part numbers BAT00002, BAT00004, WW452050-2P and ZN452050PC-1S2P used in the G4, G9, G9x and Scala Rider series.
Will the existing headset charging circuit handle this lithium-polymer cell without modification?
Yes, the fully decoded chip presents the same voltage and protection profile as the original pack, so the standard headset charger manages it normally.
How can I verify the battery is working correctly after installation?
Charge the headset normally; the on-screen battery gauge should track capacity and the unit should power the intercom for the expected talk time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



