We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium polymer battery pack dark grey plastic casing connector visible 93.54 x 53.40 x 28.20 mm

Cameron Sino Replacement Battery for DJM DJR FJM FJR 5000mAh 7.4V

SKU CH-YDAW-PH45J

A 5000mAh 7.4V lithium-polymer replacement battery for DJM, DJR, FJM and FJR crane remotes, part numbers LPM04 and R0BATT00E12A0

  • Specifications93.54 x 53.40 x 28.20
  • Typelithium_polymer
  • Battery Pack93.54 x 53.40 x 28.20
  • Battery Typelithium_polymer
  • Battery Capacity5000.00 milliamp_hours
  • Battery Voltage7.40 volts
  • 5000 mAh capacity powers crane remotes longer
  • 4 V lithium polymer matches original voltage
  • 54 × 53.40 × 28.20 mm fits DJM DJR FJM FJR
  • ISO9001 RoHS CE certified for safety compliance
  • Built-in protection guards against overcharge and short circuit

Compatible Crane Remote Battery

This Cameron Sino lithium-polymer pack replaces the original battery in DJM, DJR, FJM and FJR crane remote controls. It delivers 5000mAh at 7.4 volts and matches the OEM dimensions of 93.54 x 53.40 x 28.20 mm. A fully decoded chip ensures the same communication with the handset as the factory unit. The pack weighs 192.4 g and carries ISO9001, RoHS and CE certifications.

Buyers Who Need a Direct Swap

Operators who want a drop-in replacement for the listed part numbers LPM04 or R0BATT00E12A0 will find this pack fits without modification. It is not suited for remotes outside the DJM, DJR, FJM or FJR series, nor for devices that require a different voltage or connector layout. Users who cannot verify their original part number against the compatibility list should look elsewhere.

Integration Into the Handset

The battery slots into the existing compartment and connects with the original plug, so no wiring changes are needed. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits. Allow two or three full charge cycles for the cells to reach rated capacity. Avoid low-quality third-party chargers and do not store the pack above 60 degrees Celsius.

Highlights

  • 5000 mAh capacity powers crane remotes longer
  • 4 V lithium polymer matches original voltage
  • 54 × 53.40 × 28.20 mm fits DJM DJR FJM FJR
  • ISO9001 RoHS CE certified for safety compliance
  • Built-in protection guards against overcharge and short circuit

Specifications

BrandCameron Sino
ModelAutec DJM, DJR, FJM, FJR
Specifications93.54 x 53.40 x 28.20
Typelithium_polymer
Battery Pack93.54 x 53.40 x 28.20
Battery Typelithium_polymer
Battery Capacity5000.00 milliamp_hours
Battery Voltage7.40 volts

Questions about this item

Which crane remote control models accept the LPM04 or R0BATT00E12A0 part number?

The battery fits DJM, DJR, FJM and FJR crane remote controls that use part numbers LPM04 or R0BATT00E12A0.

Will the 93.54 x 53.40 x 28.20 mm lithium-polymer pack fit the original battery compartment?

Yes, the replacement matches the original dimensions of 93.54 x 53.40 x 28.20 mm so it seats in the same compartment.

How can I confirm the 7.4 V 5000 mAh pack is delivering full capacity after the first few charge cycles?

Run two or three complete charge and discharge cycles; the battery reaches its rated 37.00 Wh capacity once those cycles finish.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.