We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black battery pack with connector, 73 by 55.8 by 24.7 millimetres

Cameron Sino Replacement Battery 2200mAh 7.4V for Zebra QLN ZQ ZR Series

SKU CH-R7MW-2ZH5A

Replacement 2200 mAh 7.4 V battery for Zebra QLN, ZQ and ZR portable printers

  • Specifications73.24 x 55.80 x 24.73
  • Battery Pack73.24 x 55.80 x 24.73
  • Battery Capacity2200 milliamp_hours
  • Battery Voltage7.4 volts
  • 2200 mAh capacity extends mobile printing time
  • 4 V output matches original Zebra printer requirements
  • Fits QLN, ZQ and ZR series portable printers
  • ISO9001, RoHS and CE certified for safety
  • 127 g lightweight pack with decoded chip installs easily

Replacement Battery for Zebra Mobile Printers

This 2200mAh 7.4V lithium-ion pack replaces original Zebra batteries in QLN and ZQ series portable printers. It matches the electrical specification and physical footprint of the OEM cells so the printer recognises it immediately. The integrated protection circuit guards against overcharge, over-discharge and short circuits. Condition is new and the pack carries ISO9001, RoHS and CE certification.

Ready-to-Install Pack with Protection Foam

The battery ships in shock-absorbing foam that protects the cells during transit and storage. A fully decoded chip is already fitted, so no programming or calibration is required before first use. Installation videos are widely available online and show the simple connector mating process. No extra tools, cables or software are included in the package.

For Field Workers Needing a Direct Swap

This suits technicians and logistics staff who need a like-for-like replacement to keep Zebra QLN220, QLN320, ZQ500, ZQ510, ZQ520, ZQ610, ZQ620, ZR628 or ZR638 printers running. Buyers who need higher capacity than 2200mAh, a different voltage, or a battery for non-Zebra hardware should look elsewhere.

Highlights

  • 2200 mAh capacity extends mobile printing time
  • 4 V output matches original Zebra printer requirements
  • Fits QLN, ZQ and ZR series portable printers
  • ISO9001, RoHS and CE certified for safety
  • 127 g lightweight pack with decoded chip installs easily

Specifications

BrandCameron Sino
ModelQLN220, QLn220HC, QLN320, QLn320HC, ZQ500, ZQ510, ZQ520, ZQ521, ZQ610, ZQ610HC, ZQ620, ZQ620HC, ZR628, ZR638
Part NumberAT16004, BTRY-MPP-34MA1-01, BTRY-MPP-34MAHC1-01, P1023901, P1023901-LF, P1031365-025, P1031365-059, P1031365-069, P1051378
Specifications73.24 x 55.80 x 24.73
Battery Pack73.24 x 55.80 x 24.73
Battery Capacity2200 milliamp_hours
Battery Voltage7.4 volts

Questions about this item

How often will the 2200mAh battery need replacing under daily shift use?

A new 2200mAh pack reaches peak capacity after two or three full charge cycles; replace it when run-time drops below operational needs.

What limit appears first during continuous printing on the 7.4V pack?

Sustained printing drains the 16.28Wh capacity until the decoded chip triggers low-voltage protection.

How hot does the battery get when the printer runs all day?

Do not store or operate above 60°C (140°F); the built-in protection prevents over-heating during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.