We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc camera battery with flat contacts and green label

Cameron Sino R1 Edge 260V-4S1P 2600mAh 14.4V nickel-zinc camera battery

SKU CH-TEPE-DGKS5

Nickel-zinc replacement battery delivers 2600 mAh at 14.4 V for Eufy L50, L60, L60 SES and T2265 robotic vacuums

  • Typenickel_zinc
  • Pack70.50 x 37.20 x 37.00
  • Chemicalnickel_zinc
  • Capacity2600.00 milliamp_hours
  • Replaces Eufy AK330 in L50, L60, L60 SES, T2265 models
  • 2600 mAh nickel-zinc chemistry delivers 37.44 Wh runtime
  • 4 V output matches original vacuum power requirements
  • Fully decoded chip enables direct communication with device
  • Compact 70.50 x 37.20 x 37.00 mm fits existing battery bay

Cameron Sino R1 Edge nickel-zinc battery

The Cameron Sino R1 Edge is a 2600mAh 14.4V nickel-zinc replacement battery built for Eufy L50, L60, L60 SES and T2265 devices. It carries a 37.44Wh rating and a 70.50 x 37.20 x 37.00mm form factor. The pack weighs 190.0g and includes a fully decoded chip for direct compatibility.

Nickel-zinc chemistry practical limits

Nickel-zinc cells deliver the rated 2600mAh capacity at 14.4V but require two or three full charge and discharge cycles before reaching peak runtime. The integrated protection guards against overcharge, over-discharge, over-voltage and short circuits. Do not expose the pack to temperatures above 60°C or 140°F.

Check your Eufy model and original part number

Verify that your robot vacuum is an L50, L60, L60 SES or T2265 and that the original battery carries part number AK330. Confirm the connector matches the 4S1P layout before fitting. Avoid low-quality third-party chargers, which can reduce service life.

Highlights

  • Replaces Eufy AK330 in L50, L60, L60 SES, T2265 models
  • 2600 mAh nickel-zinc chemistry delivers 37.44 Wh runtime
  • 4 V output matches original vacuum power requirements
  • Fully decoded chip enables direct communication with device
  • Compact 70.50 x 37.20 x 37.00 mm fits existing battery bay

Specifications

BrandCameron Sino
ModelR1 Edge
Part Number260V-4S1P
Typenickel_zinc
Pack70.50 x 37.20 x 37.00
Chemicalnickel_zinc
Capacity2600.00 milliamp_hours

Questions about this item

Which capacity should I choose for my Eufy vacuum?

This model provides a single 2600 mAh / 37.44 Wh option at 14.4 V, matching the original AK330 specification for the L50, L60, L60 SES and T2265.

What does the 2600 mAh rating mean for actual run-time?

The 2600 mAh capacity at 14.4 V delivers 37.44 Wh, giving comparable operating time to the factory battery in supported Eufy robot vacuums.

What connector standard does this battery use?

It uses the proprietary Eufy AK330 interface with a fully decoded chip, ensuring direct compatibility with the L50, L60, L60 SES and T2265 models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.