Cameron Sino PSP-S110 1200mAh 3.7V Lithium-ion Battery for Sony PSP-2000/3000 Series
Replacement lithium-ion cell delivers 1200 mAh at 3.7 V for Sony PSP-2000 and PSP-3000 series consoles
- Specifications58.60 x 36.03 x 10.20
- Typelithium_ion
- Battery Pack58.60 x 36.03 x 10.20
- Battery Typelithium_ion
- Battery Capacity1200.00 milliamp_hours
- Battery Voltage3.70 volts
- 1200 mAh capacity extends play sessions on compatible Sony PSP models
- 7 V lithium-ion chemistry matches original power specifications for reliable operation
- 60 x 36.03 x 10.20 mm form factor fits PSP-2000 and PSP-3000 series battery compartments precisely
- Built-in protection circuits guard against overcharge, over-discharge and short circuits for safer use
- ISO 9001, RoHS and CE certifications confirm manufacturing quality and safety compliance
1200 mAh replacement battery for PSP-2000
This Cameron Sino lithium-ion cell delivers 3.7 volts and 4.44 Wh in the form factor used by Sony PSP-2000, PSP-3000 and Slim models. It is built for owners of those handhelds who need a fresh power source because the original pack no longer holds charge. The unit includes a decoded chip that communicates with the console exactly like the factory battery.
Replaces an ageing original PSP-S110 pack
When the stock battery swells, drains in minutes or fails to boot the system, this 1200 mAh cell restores normal run time. The jump is worth it if your console shuts down during play or cannot start without the AC adapter connected. It is not for users who want a higher-capacity extended pack or a different voltage chemistry.
Verify the PSP model number and original part number
Check the sticker inside the battery compartment for PSP-2000, PSP-3000 or Slim designations and confirm the original battery reads PSP-S110. Ensure the connector orientation matches the socket before fitting. Do not install if the console shows corrosion or damage around the battery bay.
Highlights
- 1200 mAh capacity extends play sessions on compatible Sony PSP models
- 7 V lithium-ion chemistry matches original power specifications for reliable operation
- 60 x 36.03 x 10.20 mm form factor fits PSP-2000 and PSP-3000 series battery compartments precisely
- Built-in protection circuits guard against overcharge, over-discharge and short circuits for safer use
- ISO 9001, RoHS and CE certifications confirm manufacturing quality and safety compliance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Lite, PSP 2th, PSP-2000, PSP-2001, PSP-2002, PSP-2003, PSP-2004, PSP-2005, PSP-2006, PSP-2007, PSP-2008, PSP-3000, PSP-3001, PSP-3002, PSP-3003, PSP-3004, PSP-3005, PSP-3006, PSP-3007, PSP-3008, Slim |
| Part Number | PSP-S110 |
| Specifications | 58.60 x 36.03 x 10.20 |
| Type | lithium_ion |
| Battery Pack | 58.60 x 36.03 x 10.20 |
| Battery Type | lithium_ion |
| Battery Capacity | 1200.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
Will the 58.60 x 36.03 x 10.20 mm dimensions fit my PSP-2000 battery compartment?
Yes, the 58.60 x 36.03 x 10.20 mm dimensions match the original Sony PSP-S110 battery used in the PSP-2000, PSP-3000 and Slim models.
What is the step people get wrong when installing this lithium-ion pack?
The connector must be fully seated before closing the cover; a loose connection prevents the PSP from recognising the 3.7 V pack.
When will the 1200 mAh capacity drop enough to need a new pack?
After 2 or 3 full charge and discharge cycles the battery reaches its best performance; capacity gradually declines with age and use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



