We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery with flat black finish, thin profile and connector tab

Cameron Sino P325385A4H 1600mAh 5.92Wh iPod 2nd Gen 1st

SKU CH-9QE1-B8G5E

Replacement lithium-ion cell for Apple iPod 2nd Generation 1st with 1600mAh capacity and 3.7V output

  • Capacity1600mAh / 5.92Wh
  • Weight92.0
  • 1600mAh capacity powers the 2nd Generation iPod for extended listening
  • 92Wh lithium-ion cell matches original voltage and energy rating
  • 90 x 54.69 x 4.00mm form factor fits the original battery compartment exactly
  • ISO9001, RoHS and CE certified for safety and environmental compliance
  • Integrated protection circuit guards against overcharge, over-discharge and short circuit

Direct replacement for 2nd Generation iPod 1st

This Cameron Sino battery matches the original Apple part number P325385A4H and fits the 2nd Generation iPod 1st media player. It delivers 1600mAh at 3.7 Volts using Lithium Ion chemistry. The pack is certified to ISO9001, RoHS and CE standards.

Low self-discharge and built-in protection

The cell holds its charge during storage and includes safeguards against overcharge, over-discharge, over-voltage and short circuits. Normal use produces minimal heat and no audible noise. A fully decoded chip communicates with the player exactly like the original battery.

Capacity of 1600mAh and 5.92Wh

This single figure determines whether the runtime meets your needs. Buyers who need longer playback between charges cannot use this part. The physical size is 84.90 x 54.69 x 4.00mm and the cell weighs 42.0g.

Highlights

  • 1600mAh capacity powers the 2nd Generation iPod for extended listening
  • 92Wh lithium-ion cell matches original voltage and energy rating
  • 90 x 54.69 x 4.00mm form factor fits the original battery compartment exactly
  • ISO9001, RoHS and CE certified for safety and environmental compliance
  • Integrated protection circuit guards against overcharge, over-discharge and short circuit

Specifications

BrandCameron Sino
Model2nd Generation, iPOD 1st
Part NumberP325385A4H
Capacity1600mAh / 5.92Wh
Weight92.0

Questions about this item

How is the P325385A4H battery installed in the iPod 2nd Gen and what step is often missed?

Open the case, disconnect the old pack, connect the new battery's connector firmly until it clicks, then reassemble; the step people miss is verifying the connector is fully seated before closing the device.

What maintenance will this 1600mAh lithium-ion cell need over its life?

No routine maintenance is required; after installation run two or three full charge and discharge cycles to reach full capacity, then recharge normally and avoid storing above 60 °C.

What limit appears first during sustained use of this 3.7 V 5.92 Wh pack?

The protection circuit will cut power if the cell is overcharged, over-discharged, over-voltage or short-circuited, so the safety limits trigger before the 1600 mAh capacity is exhausted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.