Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00995782BTC
In stock
Cameron Sino Nickel-Zinc Battery 6500mAh 3.6V for DAITEM D8000 D8101 DP8105F
Nickel-zinc replacement battery delivering 6500mAh at 3.6V for DAITEM alarm panels including D8000, D8101 and DP8105F models
- Specifications52.00 x 28.00
- Typenickel_zinc
- Battery Pack52.00 x 28.00
- Battery Typenickel_zinc
- Battery Capacity6500.00 milliamp_hours
- Battery Voltage3.60 volts
- Compatible with DAITEM D8000, D8101, DP8105F and many more models
- 6500mAh nickel-zinc chemistry delivers 23.40Wh for long runtime
- 6V output matches original specification for safe operation
- Compact 52.00 x 28.00mm size fits existing battery compartment
- Certified to ISO9001, RoHS and CE standards for quality assurance
Nickel-zinc replacement battery for DAITEM alarms
This nickel-zinc cell delivers 6500 mAh at 3.6 V and fits a long list of DAITEM control panels including D8000, D8101, D8102, D8105, D8106, D8200, D8620, D8621, D8900, DP8000, DP8105, DP8105F, DP8106, DP8106F, DP8111, DP8111F, DP8200, DP8201, DP8202, DP8211F, DP8212F, DP8260F, DP8620F, DP8620X, DP8621F, DP8622F, DP8622X. It replaces original part numbers such as 63706, 80110102, BAL3, BAT01, BATLi01, BATO1, D8900 and FAS 890.
Practical limits of the nickel-zinc chemistry
The pack measures 52.00 mm by 28.00 mm and supplies 23.40 Wh of energy. Nickel-zinc cells operate at a fixed 3.6 V nominal voltage, so the alarm panel must be designed for that voltage and not for a different chemistry. A new cell reaches full capacity after two or three complete charge and discharge cycles. Do not expose the battery to temperatures above 60 °C (140 °F) and never disassemble or incinerate it.
What to verify on your existing setup
Confirm the exact model number printed on your DAITEM panel and cross-reference it with the compatible list above. Check that the original battery carries one of the listed part numbers and that the connector layout matches the 52.00 mm by 28.00 mm form factor. Ensure the panel’s charging circuit is intended for nickel-zinc chemistry and avoid using low-quality third-party chargers that can shorten service life.
Highlights
- Compatible with DAITEM D8000, D8101, DP8105F and many more models
- 6500mAh nickel-zinc chemistry delivers 23.40Wh for long runtime
- 6V output matches original specification for safe operation
- Compact 52.00 x 28.00mm size fits existing battery compartment
- Certified to ISO9001, RoHS and CE standards for quality assurance
Specifications
| Brand | cameron Sion |
|---|---|
| Model | ABB Stotz S&J FAS 8900 DAITEM D8900 D8106 D8105 D8102 D8101 D8200 D8621 D8620 D8000 DP8622X DP8622F DP8621F DP8620X DP8620F DP8260F |
| Part Number | DAITEM BATLi01 BAL3 63706 BAT01 BATO1 FAS 890 D8900 80110102 PCL956361 |
| Specifications | 52.00 x 28.00 |
| Type | nickel_zinc |
| Battery Pack | 52.00 x 28.00 |
| Battery Type | nickel_zinc |
| Battery Capacity | 6500.00 milliamp_hours |
| Battery Voltage | 3.60 volts |
Questions about this item
Should I pick the 6500mAh version or a lower capacity for my DAITEM alarm panel?
The 6500mAh capacity is the single option listed for this nickel-zinc pack. It replaces the original BATLi01 and BAL3 cells used across the D8000, D8101 and DP8105F series, so there is no lower-capacity alternative to choose.
What runtime does the 23.40Wh rating give in a DAITEM D8000 panel?
At 3.6V the pack stores 23.40Wh. A typical DAITEM control unit draws a few milliamps on standby, so the battery can maintain the system for many hours during a mains outage before the low-voltage alert triggers.
Does the nickel-zinc chemistry need a special charger or will the panel's built-in circuit handle it?
The pack includes a fully decoded chip that communicates with the DAITEM panel's existing charge circuit. No external charger or firmware change is required; the panel manages the 3.6V nickel-zinc cells exactly as it did the original battery.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
