Cameron Sino Nickel-Zinc Battery 2000mAh 7.2V FNB-47/49 Series
Nickel-zinc replacement pack delivers 2000mAh at 7.2V for Yaesu FT10R, FT40R, FT50R and VX10 radios
- Specifications84.00 x 67.00 x 35.00
- Typenickel_zinc
- Battery Pack84.00 x 67.00 x 35.00
- Battery Typenickel_zinc
- Battery Capacity2000.00 milliamp_hours
- Battery Voltage7.20 volts
- Replaces original YAESU packs for FT10R, FT40R, FT50R and VX10 radios
- Nickel-zinc chemistry delivers 2000mAh capacity at 7.2V for extended talk time
- Certified to ISO9001, RoHS and CE standards for safety and reliability
- Compact 84.00 x 67.00 x 35.00 mm design fits existing battery compartments
- Built-in protection guards against overcharge, over-discharge and short circuits
Compatible two-way radio battery
This nickel-zinc battery replaces the original Yaesu FNB-47, FNB-47H, FNB-V47, FNB-V47IS, FNB-V49 and FNB-V49H packs. It fits the FT10R, FT-10R, FT40R, FT-40R, FT50R, FT-50R, VX10 and VX-10 handheld radios. The 2000mAh capacity at 7.2V delivers 14.40Wh of energy for extended field use. Buyers needing a different voltage or chemistry cannot use this pack.
Nickel-zinc construction and dimensions
The cell chemistry is nickel-zinc, housed in a pack measuring 84.00 x 67.00 x 35.00mm and weighing 280.0g. A fully decoded chip ensures the radio recognises the battery exactly as the original unit. Overcharge, over-discharge, over-voltage and short-circuit protection circuits are built in. Users who require a lighter lithium-ion alternative or a different form factor will find this pack unsuitable.
Practical limits of the 7.2V nickel-zinc platform
Nickel-zinc chemistry provides a nominal 7.20 volts with 2000.00mAh capacity, but self-discharge is higher than lithium-based packs. The battery reaches full performance after two or three complete charge cycles. Storage above 60°C (140°F) is prohibited and the pack must never be disassembled or exposed to fire or water. Operators needing weeks of standby time without recharging should consider the chemistry's self-discharge characteristic.
Highlights
- Replaces original YAESU packs for FT10R, FT40R, FT50R and VX10 radios
- Nickel-zinc chemistry delivers 2000mAh capacity at 7.2V for extended talk time
- Certified to ISO9001, RoHS and CE standards for safety and reliability
- Compact 84.00 x 67.00 x 35.00 mm design fits existing battery compartments
- Built-in protection guards against overcharge, over-discharge and short circuits
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | FT10R, FT-10R, FT40R, FT-40R, FT50R, FT-50R, VX10, VX-10 |
| Part Number | FNB-47, FNB-47H, FNB-V47, FNB-V47IS, FNB-V49, FNB-V49H |
| Specifications | 84.00 x 67.00 x 35.00 |
| Type | nickel_zinc |
| Battery Pack | 84.00 x 67.00 x 35.00 |
| Battery Type | nickel_zinc |
| Battery Capacity | 2000.00 milliamp_hours |
| Battery Voltage | 7.20 volts |
Questions about this item
What voltage does the 7.2V nickel-zinc pack deliver to the radio?
The pack supplies a nominal 7.2 volts, matching the original FNB-47/FNB-49 specification for compatible Yaesu two-way radios.
Will the 84.00 x 67.00 x 35.00 mm case fit my FT-50R battery compartment?
Yes, those are the exact dimensions of the OEM FNB-47/FNB-49 pack, so it seats in the FT-50R, FT-40R, FT-10R, VX-10 and other listed models without modification.
How do I install the replacement pack and what is the common mistake?
Slide the pack into the radio until the latch clicks, then ensure the connector is fully seated; the frequent error is leaving the connector slightly loose, which prevents power-up.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
