Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00998582BTC
In stock
cameron sino MUL-T-LOCK 130080 81130080 2600mAh 7.4V lithium polymer standard battery
Replacement lithium-polymer battery for MUL-T-LOCK 130080 and 81130080, 2600mAh at 7.4V
- Specifications69.70 x 37.30 x 19.30
- Typelithium_polymer
- Battery Pack69.70 x 37.30 x 19.30
- Battery Typelithium_polymer
- Battery Capacity2600 milliamp_hours
- Battery Voltage7.4 volts
- 2600 mAh capacity powers MUL-T-LOCK devices longer
- 4 V lithium polymer matches original specifications
- 70 × 37.30 × 19.30 mm fits part numbers 130080 and 81130080
- Fully decoded chip works like the factory battery
- Overcharge, over-discharge, over-voltage and short-circuit protection built in
Replacement battery for MUL-T-LOCK
This 7.4 V lithium-polymer pack is built to match the original MUL-T-LOCK part numbers 130080 and 81130080. It fits devices that specify those exact codes and is supplied new with a fully decoded chip that works like the factory cell.
2600 mAh capacity and runtime
The cell stores 2600 mAh (19.24 Wh) at 7.4 V, giving the lock system its rated operating time between charges. Runtime will fall when the load exceeds the pack’s current capability or when the cell ages after repeated cycles.
Pre-fitted protection and packaging
An integrated circuit guards against over-charge, over-discharge, over-voltage and short-circuit events. The pack ships inside shock-absorbing foam for transit protection, and the supplier notes that two or three full charge-discharge cycles bring the battery to peak performance.
Highlights
- 2600 mAh capacity powers MUL-T-LOCK devices longer
- 4 V lithium polymer matches original specifications
- 70 × 37.30 × 19.30 mm fits part numbers 130080 and 81130080
- Fully decoded chip works like the factory battery
- Overcharge, over-discharge, over-voltage and short-circuit protection built in
Specifications
| Brand | cameron sino |
|---|---|
| Model | ASSA ABLOY MUL-T-LOCK MUL-T-LOCK |
| Part Number | ASSA ABLOY 130080 81130080 130080 81130080 |
| Specifications | 69.70 x 37.30 x 19.30 |
| Type | lithium_polymer |
| Battery Pack | 69.70 x 37.30 x 19.30 |
| Battery Type | lithium_polymer |
| Battery Capacity | 2600 milliamp_hours |
| Battery Voltage | 7.4 volts |
Questions about this item
Will the 7.4 V 2600 mAh pack fit the existing MUL‑T‑LOCK housing that used part number 130080?
Yes — it matches the 69.70 × 37.30 × 19.30 mm dimensions and the 7.4 V 2600 mAh rating of the original 130080/81130080 battery, so it slots straight into the same compartment.
How can I confirm the battery is working correctly after installation?
After fitting, run two or three full charge‑discharge cycles; the built‑in decoded chip will report capacity and voltage normally, and the lock should operate without low‑power warnings.
What comes in the box and do I need any extra items?
The package contains one 2600 mAh lithium‑polymer cell with protective foam; no charger, cables or mounting hardware are included, so reuse your existing MUL‑T‑LOCK charger.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
