Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00995889BTC
In stock
Cameron Sino MS-NCE2566-0 700mAh 3.6V Ni-Zn battery
Nickel-zinc 700 mAh 3.6 V cell replaces Johnson Controls MS-NCE2566-0 PLC batteries
- Specifications131.00 x 10.70 x 10.70
- Typenickel_zinc
- Battery Pack131.00 x 10.70 x 10.70
- Battery Typenickel_zinc
- Battery Capacity700.00 milliamp_hours
- Battery Voltage3.60 volts
- 700 mAh capacity keeps PLC systems running longer
- 6 V Ni-Zn chemistry matches original voltage exactly
- 131 x 10.7 x 10.7 mm size fits MS-NCE2566-0 slot precisely
- ISO 9001 certified production ensures consistent quality
- Replaces MSBAT10200 and MS-BAT1020-0 part numbers directly
Replacement battery for MS-NCE2566-0
This 3.60 V nickel-zinc cell delivers 700 mAh and 2.52 Wh in a 131.00 x 10.70 x 10.70 mm form factor. It replaces Johnson Controls part numbers MSBAT10200, MS-BAT1020-0, MSBAT10200SUB and MS-BAT1020-0-SUB. The pack weighs 39.0 g and includes a decoded chip for direct compatibility. Installers should verify the model number before fitting.
Thermal behaviour and power profile
Nickel-zinc chemistry operates without the memory effect common in older Ni-MH packs and tolerates indoor ambient temperatures up to 60 140. Self-discharge is low during storage, so the cell holds charge between maintenance cycles. No active cooling is required; the battery runs silently and draws only the current demanded by the PLC load. A full charge cycle restores the rated 700.00 mAh capacity.
Bundled protection and support
The package includes shock-absorbing foam that guards the cell during transit and handling. Built-in circuitry provides overcharge, over-discharge, over-voltage and short-circuit protection to extend service life. Cameron Sino backs the unit with a 24-hour email response commitment, a 30-day money-back window and a 3-month warranty. The manufacturer holds ISO 9001 certification for its production processes.
Highlights
- 700 mAh capacity keeps PLC systems running longer
- 6 V Ni-Zn chemistry matches original voltage exactly
- 131 x 10.7 x 10.7 mm size fits MS-NCE2566-0 slot precisely
- ISO 9001 certified production ensures consistent quality
- Replaces MSBAT10200 and MS-BAT1020-0 part numbers directly
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | MS-NCE2566-0 |
| Part Number | MSBAT10200, MS-BAT1020-0, MSBAT10200SUB, MS-BAT1020-0-SUB |
| Specifications | 131.00 x 10.70 x 10.70 |
| Type | nickel_zinc |
| Battery Pack | 131.00 x 10.70 x 10.70 |
| Battery Type | nickel_zinc |
| Battery Capacity | 700.00 milliamp_hours |
| Battery Voltage | 3.60 volts |
Questions about this item
How do I install the MS-NCE2566-0 battery and what step is often missed?
Slide the pack into the controller slot until the connector clicks; the step often missed is fully seating the plug so the locking tabs engage.
What maintenance or replacement will the MS-NCE2566-0 need later?
The nickel-zinc cell is sealed and maintenance-free; plan to replace the pack when run-time falls below the 2.52 Wh rating after extended cycling.
What limit appears first during sustained use of the MS-NCE2566-0?
The 60 °C / 140 °F storage ceiling is the first hard limit; sustained operation above that temperature accelerates capacity loss and triggers the protection circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
