We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, blue shrink wrap with label, two wire leads

Cameron Sino Logisty 12.0V 2000mAh NiZn alarm system battery

SKU CH-0FT6-872A4

Nickel-zinc 12.0 V 2000 mAh replacement battery fits DAITEM alarm panels including 318-16D and ES318-22F models

  • Specifications72.15 x 51.50 x 31.10
  • Typenickel_zinc
  • Battery Pack72.15 x 51.50 x 31.10
  • Battery Typenickel_zinc
  • Battery Capacity2000.00 milliamp_hours
  • Battery Voltage12.00 volts
  • Direct replacement for DAITEM 318-16D and ES318-22F models
  • 0 V 2000 mAh nickel-zinc chemistry delivers 24.00 Wh capacity
  • Compact 72.15 x 51.50 x 31.10 mm size fits existing battery compartments
  • Built-in protection against overcharge, over-discharge and short circuit
  • ISO9001, RoHS and CE certified for safety compliance

Replacement battery for DAITEM alarm systems

This 12.0 V nickel-zinc pack delivers 2000 mAh and 24.00 Wh to compatible DAITEM panels including the 318-16D, ES318-22F, ES320-22F, ES330-22F, S318-22F, S320-22F, S330-22F, S332-22F and S334-22F. It matches the original BATNIMH2 and C0106.0003 part numbers and fits the 72.15 x 51.50 x 31.10 mm battery cavity. The unit is new and carries ISO 9001, RoHS and CE certification.

Sustained load behaviour

The nickel-zinc chemistry maintains a stable 12.0 V output during extended alarm standby and siren activation, avoiding the voltage sag common with aged nickel-metal-hydride cells. Over-charge, over-discharge, over-voltage and short-circuit protection circuits preserve capacity over repeated cycles. A fully decoded chip reports accurate state-of-charge to the panel, so low-battery warnings trigger at the correct threshold.

Deciding specification

The 12.0 V nominal voltage and 2000 mAh capacity determine whether this pack powers your specific DAITEM model; verify the original battery label reads 12 V and 2000 mAh before ordering. Installers who need a different voltage, a higher amp-hour rating or a form factor outside 72.15 x 51.50 x 31.10 mm must select an alternative pack.

Highlights

  • Direct replacement for DAITEM 318-16D and ES318-22F models
  • 0 V 2000 mAh nickel-zinc chemistry delivers 24.00 Wh capacity
  • Compact 72.15 x 51.50 x 31.10 mm size fits existing battery compartments
  • Built-in protection against overcharge, over-discharge and short circuit
  • ISO9001, RoHS and CE certified for safety compliance

Specifications

BrandCameron Sino
ModelLogisty
Specifications72.15 x 51.50 x 31.10
Typenickel_zinc
Battery Pack72.15 x 51.50 x 31.10
Battery Typenickel_zinc
Battery Capacity2000.00 milliamp_hours
Battery Voltage12.00 volts

Questions about this item

Does the 12.0 V nickel-zinc cell run warm during continuous alarm-panel operation?

The nickel-zinc chemistry and 2000 mAh capacity are designed for low self-discharge standby use, so the pack stays cool during normal all-day monitoring.

Which DAITEM panel models accept the 72.15 × 51.50 × 31.10 mm Logisty pack?

It fits DAITEM 318-16D, ES318-22F, ES320-22F, ES330-22F, S318-22F, S320-22F, S330-22F, S332-22F and S334-22F panels.

Will the replacement work with the original charging circuit in an older DAITEM 318-16D unit?

Yes, the fully decoded chip matches the original BATNIMH2 and C0106.0003 specifications, so the existing charger recognises it normally.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.