We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, dark casing, connector on one end

Cameron Sino HYLB-231 Battery for SE3, SE-3 5200mAh 74.88Wh

SKU CH-BXV3-4G9AV

Replacement nickel-zinc battery for SE3 and SE-3 medical devices delivering 5200mAh at 14.4V with integrated protection circuits

  • Typenickel_zinc
  • Pack85.07 x 72.00 x 43.70
  • Chemicalnickel_zinc
  • Capacity5200.00 milliamp_hours
  • 5200mAh capacity powers SE3 and SE-3 devices longer
  • 88Wh energy rating matches original battery specifications
  • Nickel-zinc chemistry with built-in protection against overcharge and short circuit
  • Fully decoded chip works identically to the original battery
  • ISO9001 RoHS CE certified for medical equipment use

Cameron Sino HYLB-231 Medical Battery

This Cameron Sino HYLB-231 battery replaces the original power source for SE3 and SE-3 medical devices. It delivers a capacity of 5200mAh and 74.88Wh at 14.4V using nickel-zinc chemistry. The unit is certified to ISO9001, RoHS and CE standards and includes a fully decoded chip that works like the original.

Installation and common issues

The manufacturer states that many installation videos are available online and the process is very easy. Buyers must verify the device model number and the original battery part number before purchase to ensure compatibility. A new battery reaches its best performance after two or three complete charge and discharge cycles. Using a low-quality third-party charger will shorten the battery's life.

Suitability and limitations

This battery suits technicians and facilities needing a certified replacement for SE3 or SE-3 equipment with part number HYLB-231. It is not suitable for devices with a different model number or part number. Buyers who require a different voltage, chemistry or form factor should look at other options. The pack measures 85.07 x 72.00 x 43.70mm and weighs 471.1g.

Highlights

  • 5200mAh capacity powers SE3 and SE-3 devices longer
  • 88Wh energy rating matches original battery specifications
  • Nickel-zinc chemistry with built-in protection against overcharge and short circuit
  • Fully decoded chip works identically to the original battery
  • ISO9001 RoHS CE certified for medical equipment use

Specifications

BrandCameron Sino
ModelSE3, SE-3
Part NumberHYLB-231
Typenickel_zinc
Pack85.07 x 72.00 x 43.70
Chemicalnickel_zinc
Capacity5200.00 milliamp_hours

Questions about this item

How can I confirm the HYLB-231 battery is working correctly after installing it in my SE3 device?

After fitting the battery, run two or three full charge and discharge cycles; the built-in decoded chip will then report capacity accurately and the SE3 should reach the rated 5200mAh runtime.

What comes in the box with the HYLB-231 and is any extra accessory required?

The package contains one 14.4V nickel-zinc battery measuring 85.07 x 72.00 x 43.70 mm and weighing 471.1 g, plus shock-absorbing foam; no separate charger or cable is included.

Which capacity version of the HYLB-231 should I choose for the SE3?

Only the 5200mAh / 74.88Wh version is offered for the SE3 and SE-3, so select this single listed capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.