Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00996236BTC
In stock
Cameron Sino Hotspot 2 FHSBATT8-AA.9 800mAh 9.6V standard battery
Nickel-zinc 800 mAh 9.6 V replacement battery for Fulham Hotspot 2 emergency lighting
- Specifications101.30 x 57.00 x 15.00
- Typenickel_zinc
- Battery Pack101.30 x 57.00 x 15.00
- Battery Typenickel_zinc
- Battery Capacity800.00 milliamp_hours
- Battery Voltage9.60 volts
- Direct replacement for Fulham Hotspot 2 emergency lighting
- 800 mAh nickel-zinc chemistry delivers 7.68 Wh capacity
- 6 V output matches original equipment specification
- Compact 101.30 x 57.00 x 15.00 mm form factor fits existing housing
- ISO9001 RoHS CE certified with overcharge and short-circuit protection
Direct replacement for Fulham Hotspot 2
This nickel-zinc battery matches the original FHSBATT8-AA.9 specification with 800mAh capacity and 9.6V output. It fits the exact 101.30 x 57.00 x 15.00 mm form factor required by the Hotspot 2 emergency lighting unit. The integrated chip communicates with the host device exactly as the factory pack does. Buyers who need a different voltage or chemistry cannot use this pack.
Packaged with protective foam and a decoded chip
The box includes shock-absorbing foam that guards the cells during transit. A fully decoded chip is pre-installed so the battery reports status and accepts charge cycles without extra configuration. No separate cables, adapters or software discs are supplied. Installers who expect a wiring harness or mounting brackets will not find them here.
Nickel-zinc cells in a rigid housing
The 9.60 volt pack uses nickel-zinc chemistry rated at 7.68 Wh and carries ISO9001, RoHS and CE certification marks. Over-charge, over-discharge, over-voltage and short-circuit protection circuits are built into the pack. The original connector mates directly with the Hotspot 2 socket; no soldering or crimping is required. Units that demand a different connector pitch or pin count are not compatible.
Highlights
- Direct replacement for Fulham Hotspot 2 emergency lighting
- 800 mAh nickel-zinc chemistry delivers 7.68 Wh capacity
- 6 V output matches original equipment specification
- Compact 101.30 x 57.00 x 15.00 mm form factor fits existing housing
- ISO9001 RoHS CE certified with overcharge and short-circuit protection
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Hotspot 2 |
| Part Number | FHSBATT8-AA.9 |
| Specifications | 101.30 x 57.00 x 15.00 |
| Type | nickel_zinc |
| Battery Pack | 101.30 x 57.00 x 15.00 |
| Battery Type | nickel_zinc |
| Battery Capacity | 800.00 milliamp_hours |
| Battery Voltage | 9.60 volts |
Questions about this item
How often will the nickel-zinc pack need replacement in a Fulham Hotspot 2 emergency light?
The 800 mAh nickel-zinc battery is rated for 12-month warranty coverage; typical emergency-lighting packs of this chemistry last several years before capacity drops below usable levels.
What limits runtime during a prolonged power outage with this 9.6 V pack?
The 7.68 Wh capacity sets the runtime ceiling; once the stored energy is depleted the Hotspot 2 will stop illuminating until mains power returns.
Does the battery generate noticeable heat or noise while the Hotspot 2 runs all day on standby?
Nickel-zinc chemistry runs silently and produces minimal heat during float charging; the supplier cautions only against storage above 60 °C.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
