Cameron Sino HNV215B HNV215B12 EPP72L15D 2500mAh 7.4V standard battery
Replacement lithium-polymer battery for HNV215B and HNV215B12 devices, 2500 mAh at 7.4 V, ISO9001 certified
- Specifications74.00 x 45.60 x 23.80
- Typelithium_polymer
- Battery Pack74.00 x 45.60 x 23.80
- Battery Typelithium_polymer
- Battery Capacity2500 milliamp_hours
- Battery Voltage7.4 volts
- 2500mAh capacity delivers extended runtime
- 4V lithium-polymer chemistry matches original specifications
- 00 × 45.60 × 23.80mm form factor fits HNV215B and HNV215B12 devices
- ISO 9001 certified production with overcharge and short-circuit protection
- Fully decoded chip enables straightforward installation like the original battery
Direct replacement for HNV215B models
This lithium-polymer battery replaces the original pack in devices using part numbers HNV215B and HNV215B12. It matches the factory voltage of 7.4 volts and capacity of 2500 milliamp hours. The fully decoded chip communicates with the host device exactly like the original component. Dimensions are 74.00 by 45.60 by 23.80 millimetres.
Steady output through a full discharge cycle
The 18.5 watt-hour cell delivers consistent voltage under continuous load rather than only in short bursts. Integrated protection guards against overcharge, over-discharge, over-voltage and short-circuit events during extended use. A new pack reaches its rated performance after two or three complete charge and discharge cycles. The connector must be seated securely for reliable operation.
Low heat and silent operation in normal use
Lithium-polymer chemistry runs cool during typical indoor or outdoor workloads with no moving parts to generate noise. Power draw follows the device's own demand profile without added overhead from the battery circuitry. Shock-absorbing foam in the packaging protects the cell during transit so it arrives ready for installation. Avoid low-quality third-party chargers to preserve long-term health.
Highlights
- 2500mAh capacity delivers extended runtime
- 4V lithium-polymer chemistry matches original specifications
- 00 × 45.60 × 23.80mm form factor fits HNV215B and HNV215B12 devices
- ISO 9001 certified production with overcharge and short-circuit protection
- Fully decoded chip enables straightforward installation like the original battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | HNV215B, HNV215B12 |
| Part Number | EPP72L15D |
| Specifications | 74.00 x 45.60 x 23.80 |
| Type | lithium_polymer |
| Battery Pack | 74.00 x 45.60 x 23.80 |
| Battery Type | lithium_polymer |
| Battery Capacity | 2500 milliamp_hours |
| Battery Voltage | 7.4 volts |
Questions about this item
Does the 7.4 V lithium-polymer cell run hot during long use?
The pack is a standard 7.4 V lithium-polymer replacement; it produces no more heat than the original battery under normal load.
Must I already own a device that takes the EPP72L15D part number?
Yes — this battery fits only models HNV215B and HNV215B12 that originally used part EPP72L15D.
Will the 2500 mAh capacity work with my older HNV215B charger?
The fully decoded chip matches the original specification, so the existing charger will charge it normally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



