Cameron Sino GX02 5100mAh 18.87Wh Li-ion Battery for NEXGO N3 N5 N86
Replacement lithium-ion battery for NEXGO N3, N5 and N86 terminals, 5100 mAh / 18.87 Wh, 3.7 V, with overcharge and short-circuit protection
- Typeaaa
- Capacity5100mAh / 18.87Wh
- Weight120
- 5100mAh capacity powers NEXGO terminals longer
- 7V 18.87Wh lithium-ion cell matches original specs
- ISO9001 RoHS CE certified for safe operation
- 20 x 41.20 x 18.60mm fits N3 N5 N86 exactly
- New decoded chip works like the original battery
Compatible payment-terminal battery
This 5100mAh 18.87Wh lithium-ion cell replaces the original power pack in NEXGO N3, N5 and N86 terminals. It is built to the same dimensions and voltage so the device recognises it immediately. The fully decoded chip reports charge status exactly like the factory unit. Condition is new and the part carries ISO9001, RoHS and CE certification.
Capacity and daily headroom
At 3.7V the cell stores 18.87Wh, enough for a full shift of transaction processing in typical retail use. Heavy peripheral loads such as continuous receipt printing or constant wireless scanning will drain it faster. The 120g weight adds minimal bulk to the handset. After two or three complete charge cycles the battery reaches its rated runtime.
Voltage and connector match
The single deciding specification is the 3.7V nominal voltage combined with the exact connector pin-out for the NEXGO GX02 part number. If your terminal requires a different voltage or a differently keyed connector this battery will not fit or function. Always verify the part number on the original cell before ordering.
Highlights
- 5100mAh capacity powers NEXGO terminals longer
- 7V 18.87Wh lithium-ion cell matches original specs
- ISO9001 RoHS CE certified for safe operation
- 20 x 41.20 x 18.60mm fits N3 N5 N86 exactly
- New decoded chip works like the original battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | N3, N5 |
| Type | aaa |
| Part Number | GX02 |
| Capacity | 5100mAh / 18.87Wh |
| Weight | 120 |
Questions about this item
Will this 5100mAh GX02 battery fit my existing NEXGO N3 terminal without modification?
The battery is built to the exact 66.20 x 41.20 x 18.60 mm dimensions and 3.7 V specification of the original N3, N5 and N86 packs, so it slots straight into the same compartment.
How can I confirm the new fully decoded chip is communicating correctly after installation?
The terminal should recognise the battery immediately, show the 5100 mAh capacity reading and charge to 100 % without error codes; running 2 to 3 full charge cycles then settles the reported capacity.
Does the box contain only the battery or are tools and adhesive strips included?
The package supplies one 5100 mAh Li-ion cell with protective foam; no screwdrivers, opening picks or adhesive strips are provided.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MPBATT 1715mAh Cell Phone Battery for iPhone 6S 4.7" + Repair Tools
- 1200 mAh
MPBATT Google Nexus 5 LG D820 D821 2300mAh 3.8V 8.74Wh Cell Phone Battery
- 1200 mAh
MPBATT BL-51YF 3000mAh cell phone battery for LG G4 H810 H811 LS991 VS986 US991 Stylo
- 1200 mAh



