Cameron Sino Falcon X3+ X4 Battery 6800mAh 25.16Wh 3.7V
Replacement lithium-ion battery for Datalogic Falcon X3, X3+, X4 barcode scanners, 6800mAh 25.16Wh 3.7V
- Parts1Year
- High-capacity 6800mAh 25.16Wh power for extended scanning shifts
- Certified ISO9001 RoHS CE for safety and compliance
- Precision-fit 79.00 x 41.16 x 24.55mm dimensions match original battery exactly
- Built-in overcharge over-discharge short-circuit protection safeguards device and data
- Rechargeable lithium-ion 3.7V chemistry with fully decoded chip works like the original
Compatible Replacement Battery
This lithium-ion battery replaces the original power cell in Datalogic Falcon X3, Falcon X3 Plus, Falcon X3+ and Falcon X4 barcode scanners. It delivers a capacity of 6800mAh and 25.16Wh at a nominal voltage of 3.7V. The pack measures 79.00 by 41.16 by 24.55mm and weighs 120.0g. A fully decoded chip ensures communication with the host device matches the factory unit.
Suitable For Single-Unit Swaps
The battery suits technicians or operations teams needing a direct replacement for a depleted original in the listed Falcon models. It is not intended for users requiring a different form factor, a higher voltage platform, or a non-rechargeable chemistry. Buyers who need to power a different scanner series or a device with a distinct connector should look elsewhere.
Verify Model And Part Number
Before ordering, confirm the scanner model identifier and the original battery part number, which should read 94ACC1386 or BT-26. Check that the connector on the existing pack matches the replacement. Ensure the device firmware does not enforce a proprietary authentication that blocks third-party cells. A proper fit depends on exact model alignment.
Highlights
- High-capacity 6800mAh 25.16Wh power for extended scanning shifts
- Certified ISO9001 RoHS CE for safety and compliance
- Precision-fit 79.00 x 41.16 x 24.55mm dimensions match original battery exactly
- Built-in overcharge over-discharge short-circuit protection safeguards device and data
- Rechargeable lithium-ion 3.7V chemistry with fully decoded chip works like the original
Specifications
| Parts | 1Year |
|---|
Questions about this item
Which Datalogic scanner models accept this 6800mAh battery?
It fits the Falcon X3, Falcon X3 Plus, Falcon X3+ and Falcon X4 barcode scanners.
Will the original Datalogic charger work with this 3.7V replacement?
Yes, the voltage matches the original BT-26 cell so the factory charger can be used.
How do I confirm the new battery is performing correctly after fitting?
After two or three full charge and discharge cycles the scanner should reach the rated 25.16Wh runtime.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
