Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01000494BTC
In stock
Cameron Sino EL1700-L2T6X GoLift 700 2000mAh 14.4V standard battery
Replacement lithium-ion battery for Amico GoLift 700 patient lifts, 2000 mAh at 14.4 V
- Specifications102.30 x 44.00 x 41.00
- Battery Pack102.30 x 44.00 x 41.00
- Battery Capacity2000 milliamp_hours
- Battery Voltage14.4 volts
- Direct replacement for Amico EL1700-L2T6X medical devices
- 2000mAh capacity at 14.4V delivers 28.80Wh of reliable power
- Compact 102.30 x 44.00 x 41.00mm design fits original battery compartment
- Built-in protection against overcharge, over-discharge, over-voltage and short circuits
- ISO9001, RoHS and CE certified with fully decoded chip matching original specifications
Replacement battery for Amico GoLift 700
This 14.4 V lithium-ion pack replaces the original Amico EL1700-L2T6X battery in GoLift 700 patient lifts. It is built to the same physical and electrical specifications as the factory unit and includes a fully decoded chip that communicates with the lift's electronics. The pack is certified to ISO 9001, RoHS and CE standards and ships in protective foam packaging.
Capacity and runtime limits
Rated at 2000 mAh and 28.80 Wh, the battery delivers enough energy for multiple lift cycles in typical care environments. Runtime falls as the load approaches the lift's maximum capacity or when the pack nears the end of its cycle life; after 2–3 full charge-discharge cycles the cells reach their rated performance. It is not suited for continuous high-drain operation or for devices that demand a higher voltage or capacity.
Voltage and chemistry constraints
The pack operates at a nominal 14.4 V and must only be charged with a compatible Amico charger; low-quality third-party adapters can shorten cell life. Storage above 60 °C / 140 °F is prohibited, and the unit must never be disassembled, immersed or incinerated. No other voltage, chemistry or form factor is supported by this replacement.
Highlights
- Direct replacement for Amico EL1700-L2T6X medical devices
- 2000mAh capacity at 14.4V delivers 28.80Wh of reliable power
- Compact 102.30 x 44.00 x 41.00mm design fits original battery compartment
- Built-in protection against overcharge, over-discharge, over-voltage and short circuits
- ISO9001, RoHS and CE certified with fully decoded chip matching original specifications
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | EL1700-L2T6X, GoLift 700 |
| Part Number | EL1700-L2T6X |
| Specifications | 102.30 x 44.00 x 41.00 |
| Battery Pack | 102.30 x 44.00 x 41.00 |
| Battery Capacity | 2000 milliamp_hours |
| Battery Voltage | 14.4 volts |
Questions about this item
Will the EL1700-L2T6X battery fit alongside the existing Amico GoLift 700 charger I already use?
Yes, this 14.4 V 2000 mAh pack is built to the original 102.30 x 44.00 x 41.00 mm dimensions and uses the same connector, so it works with the standard Amico charger you already own.
How can I confirm the new battery is delivering the rated 28.80 Wh after installation?
Run the GoLift 700 through two or three full charge and discharge cycles; the built-in decoded chip will then report capacity accurately and the lift will operate for the expected runtime.
Does the box include a charger or only the 334.0 g battery itself?
Only the replacement battery is supplied; the original Amico charger must be used separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
