Cameron Sino EBP-101 1800mAh 7.4V Li-Po Battery for Alinco Radios
A 7.4V 1800mAh lithium-polymer replacement pack for Alinco DJ-PAX4, DJ-VX10, DJ-VX46, DJ-VX50, DJ-VX50HE, DJ-VX50T, DJ-W18 and DJ-W58 two-way radios
- Typelithium_polymer
- Battery Typelithium_polymer
- Battery Capacity1800.00 milliamp_hours
- Battery Voltage7.40 volts
- Compatible with Alinco DJ-PAX4, DJ-VX10, DJ-VX46, DJ-VX50, DJ-VX50HE, DJ-VX50T, DJ-W18, DJ-W58
- 1800mAh capacity provides extended operating time for two-way radio use
- 4V lithium-polymer chemistry matches original battery specifications
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Certified to ISO9001, RoHS and CE standards for quality and safety assurance
Cameron Sino EBP-101 1800mAh Battery
This 7.4V lithium-polymer pack replaces the original Alinco EBP-101 cell in compatible two-way radios. It suits operators of DJ-PAX4, DJ-VX10, DJ-VX46, DJ-VX50, DJ-VX50HE, DJ-VX50T, DJ-W18 and DJ-W58 handsets who need a fresh power source. The 1800mAh capacity delivers 13.32Wh of energy for extended field use. Buyers whose radio uses a different part number cannot use this pack.
Thermals and power behaviour
The lithium-polymer chemistry provides stable voltage output across the discharge cycle under normal transmit and receive loads. Integrated protection guards against over-charge, over-discharge, over-voltage and short-circuit events during operation. No active cooling is required and the pack runs silently in the radio chassis. The fully decoded chip communicates correctly with the host radio for accurate fuel gauging.
Bundled protection and installation aids
Shock-absorbing foam inside the package protects the cell during transit and storage. A new fully decoded chip is pre-fitted so the battery works immediately without additional programming. The supplier notes that two to three full charge cycles bring the pack to its best performance. Installation videos are referenced online for users who prefer visual guidance.
Highlights
- Compatible with Alinco DJ-PAX4, DJ-VX10, DJ-VX46, DJ-VX50, DJ-VX50HE, DJ-VX50T, DJ-W18, DJ-W58
- 1800mAh capacity provides extended operating time for two-way radio use
- 4V lithium-polymer chemistry matches original battery specifications
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Certified to ISO9001, RoHS and CE standards for quality and safety assurance
Specifications
| Brand | cameron sino |
|---|---|
| Model | DJ-PAX4, DJ-VX10, DJ-VX46, DJ-VX50, DJ-VX50HE, DJ-VX50T, DJ-W18, DJ-W58 |
| Part Number | EBP-101 |
| Type | lithium_polymer |
| Battery Type | lithium_polymer |
| Battery Capacity | 1800.00 milliamp_hours |
| Battery Voltage | 7.40 volts |
Questions about this item
How do I install the EBP-101 battery in my Alinco DJ-VX50 and what step is often missed?
Insert the battery pack until the latch clicks, then verify the connector is fully seated; the supplier notes that a loose connector is the most common install error.
What maintenance will this 1800 mAh Li-Po battery need over time?
Run two or three full charge and discharge cycles when new to reach rated capacity, then avoid deep discharge and store at roughly half charge if unused for weeks.
Which limit appears first during a long transmit session on my DJ-W58?
The 1800 mAh capacity sets runtime; sustained high-power TX draws current steadily until the pack reaches its low-voltage cutoff at 7.4 V nominal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



