Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00998306BTC
In stock
Cameron Sino E1 8800mAh 3.70V Nickel-Zinc Battery for Pure Evoke 1S 2S Flow Mio
Nickel-zinc replacement battery delivers 8800mAh at 3.70V for Pure Evoke DAB radios including Evoke 1S, 2S, Flow, Mio and One Flow models
- Specifications73.00 x 67.00 x 20.00
- Typenickel_zinc
- Battery Pack73.00 x 67.00 x 20.00
- Battery Typenickel_zinc
- Battery Capacity8800.00 milliamp_hours
- Battery Voltage3.70 volts
- Replacement battery fits Pure Evoke 1S, 2S, Flow, Mio and Sensia models
- 8800 mAh nickel-zinc chemistry delivers 32.56 Wh of portable power
- 70 V output matches original specification for reliable operation
- Compact 73.00 × 67.00 × 20.00 mm pack installs without modification
- Fully decoded chip works like the original and meets ISO9001, RoHS, CE standards
Compatible Pure DAB radios
This nickel-zinc replacement battery fits Pure Evoke 1S, Evoke 2S, Evoke Flow, Evoke Mio and related models including the Union Jack and Marshall editions. It supplies 8800mAh capacity at 3.70 volts and matches the original E1 part number for direct compatibility.
Simple installation with care
Many online videos demonstrate the straightforward swap, but the connector must be seated correctly to avoid power issues. Allow two or three full charge and discharge cycles for the decoded chip to reach optimal performance, and avoid low-quality third-party chargers that can shorten battery life.
Check model and part numbers
Verify your radio's exact model designation and the original battery's part number before ordering to ensure a proper match. The pack measures 73.00 by 67.00 by 20.00 millimetres and weighs 188 grams, so confirm the battery compartment accommodates these dimensions.
Highlights
- Replacement battery fits Pure Evoke 1S, 2S, Flow, Mio and Sensia models
- 8800 mAh nickel-zinc chemistry delivers 32.56 Wh of portable power
- 70 V output matches original specification for reliable operation
- Compact 73.00 × 67.00 × 20.00 mm pack installs without modification
- Fully decoded chip works like the original and meets ISO9001, RoHS, CE standards
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Evoke 1S, Evoke 2S, Evoke Flow, Evoke Mio, Evoke Mio by Orla Kiely, Evoke Mio Union Jack, EVOKE-1S, EVOKE-1S Marshall, Evoke-2S, EvokeE-1S, One Flow, One Flow radios, Sensia, Verona, VL-60924 |
| Part Number | E1 |
| Specifications | 73.00 x 67.00 x 20.00 |
| Type | nickel_zinc |
| Battery Pack | 73.00 x 67.00 x 20.00 |
| Battery Type | nickel_zinc |
| Battery Capacity | 8800.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
How do I verify the 8800mAh battery is working correctly after installing it in my Evoke Flow?
Fully charge the pack, then run the radio on DAB until empty; a healthy unit should deliver runtime close to the rated 32.56 Wh before the low-power indicator appears.
What comes in the box and do I need any extra parts to fit it in a Pure Evoke 1S?
The package contains one 73.00 x 67.00 x 20.00 mm nickel-zinc cell with a pre-fitted connector; no additional cables, screws or tools are required for the Evoke 1S.
Which version should I choose for a Pure Evoke Mio Union Jack — the 3.70 V or the 7.4 V listing?
Both figures refer to the same E1 pack; the cell chemistry is 3.70 V nominal and the integrated electronics present 7.4 V to the radio, so order the single E1 part number.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
