Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00999038BTC
In stock
Cameron Sino DAITEM 908-21X 700mAh 3.7V nickel-zinc battery
Nickel-zinc 700 mAh 3.7 V replacement battery for DAITEM DP8000 and SC-series intercom controllers
- Specifications1 Count (Pack of 1)
- Typenickel_zinc
- Battery Pack1 Count (Pack of 1)
- Battery Typenickel_zinc
- Battery Capacity700 milliamp_hours
- Battery Voltage3.7 volts
- Compatible with DAITEM DP8000 and intercom controllers
- 700 mAh nickel-zinc chemistry delivers 3.7 V power
- Certified to ISO 9001, RoHS and CE standards
- Compact 50.00 x 16.40 x 14.30 mm size fits original slot
- Built-in protection against overcharge, over-discharge and short circuit
Replacement battery for DAITEM intercoms
This Cameron Sino nickel-zinc cell replaces the original DAITEM 908-21X battery in DP8000 panels, SC200AF, SC200AU, SC201AF and SC201AX controllers and Sender GSM G470-30 units. It delivers 700 mAh at 3.7 V and matches the factory dimensions of 50.00 x 16.40 x 14.30 mm. The pack contains one 21.0 g cell with a decoded chip that communicates like the original.
Who should choose this and who should not
Installers and owners of the listed DAITEM alarm and intercom devices who need a direct-fit replacement will find the correct voltage, capacity and connector. Buyers whose equipment uses a different part number, a different chemistry or a higher capacity requirement cannot use this cell.
Deciding specification — 700 mAh nickel-zinc
The single figure that determines compatibility is the 700 mAh nickel-zinc rating at 3.7 V in the 50.00 x 16.40 x 14.30 mm form factor. If the original battery shows those exact values and the DAITEM 908-21X part number, this unit is the correct match.
Highlights
- Compatible with DAITEM DP8000 and intercom controllers
- 700 mAh nickel-zinc chemistry delivers 3.7 V power
- Certified to ISO 9001, RoHS and CE standards
- Compact 50.00 x 16.40 x 14.30 mm size fits original slot
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | cameron Sion |
|---|---|
| Model | Dialler 442-29 X 450-29 X 470-29 X 485-21 X DAITEM DP8000 Intercom Controllers SC200AF SC201AF 473-16X 495-16X 442-29X 470-29X |
| Part Number | DAITEM 908-21X BAT90821 |
| Specifications | 1 Count (Pack of 1) |
| Type | nickel_zinc |
| Battery Pack | 1 Count (Pack of 1) |
| Battery Type | nickel_zinc |
| Battery Capacity | 700 milliamp_hours |
| Battery Voltage | 3.7 volts |
Questions about this item
How long will the 700 mAh capacity actually run my DAITEM DP8000 intercom controller?
The 700 mAh rating at 3.7 V delivers 2.59 Wh; runtime depends on the controller's current draw, so divide 700 mAh by that draw to estimate hours.
What connector standard does the DAITEM 908-21X battery use?
It uses the original DAITEM connector for the DP8000, SC200AF, SC200AU, SC201AF, SC201AX and Sender GSM G470-30; the fully decoded chip ensures direct compatibility.
Will the 50.00 x 16.40 x 14.30 mm pack fit inside my SC200AF controller housing?
Yes, those are the exact dimensions of the original pack, so it slots into the same compartment without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
