Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01001024BTC
In stock
Cameron Sino DAITEM 330-23 330-23x 500798 951-21X 3350mAh 12.40Wh standard battery
Nickel-zinc replacement battery for DAITEM 330-23 and 330-23x alarm systems, 3350mAh at 3.7 volts
- Specifications67.00 x 20.00 x 18.60
- Typenickel_zinc
- Battery Pack67.00 x 20.00 x 18.60
- Battery Typenickel_zinc
- Battery Capacity3350.00 milliamp_hours
- Battery Voltage3.70 volts
- Direct replacement for DAITEM 330-23 and 330-23x models
- 3350 mAh capacity delivers 12.40 Wh of runtime
- Nickel-zinc chemistry with built-in protection circuits
- Exact 67.00 x 20.00 x 18.60 mm fit for secure installation
- Certified to ISO 9001, RoHS and CE standards
Replacement battery for DAITEM 330-23 and 330-23x
This nickel-zinc battery replaces the original DAITEM 500798 and 951-21X packs used in alarm system panels. It delivers a nominal 3.7 volts and a capacity of 3350 milliamp hours for 12.40 watt-hours of energy storage. The pack measures 67.00 by 20.00 by 18.60 millimetres and weighs 52.0 grams. It is intended for indoor security installations that require a direct-fit replacement cell.
Verify model and part numbers before ordering
Confirm that your device is a DAITEM 330-23 or 330-23x and that the original battery carries part number 500798 or 951-21X. Check the physical dimensions against the 67.00 by 20.00 by 18.60 millimetre outline to ensure it fits the compartment. Ensure the connector polarity matches the original pack before making the connection. A new cell reaches full performance after two or three complete charge and discharge cycles. Avoid low-quality third-party chargers as they can shorten service life.
Steady discharge in alarm standby use
The nickel-zinc chemistry provides a stable 3.7 volt output during the long, low-current standby periods typical of security panels. Rated at 3350 milliamp hours, the cell supports extended backup duration between mains failures. Integrated protection guards against overcharge, over-discharge, over-voltage and short-circuit events during continuous float charging. The pack is certified to ISO 9001, RoHS and CE standards for safe, durable operation. Do not disassemble, expose to fire or water, or store above 60 degrees Celsius.
Highlights
- Direct replacement for DAITEM 330-23 and 330-23x models
- 3350 mAh capacity delivers 12.40 Wh of runtime
- Nickel-zinc chemistry with built-in protection circuits
- Exact 67.00 x 20.00 x 18.60 mm fit for secure installation
- Certified to ISO 9001, RoHS and CE standards
Specifications
| Brand | cameron sino |
|---|---|
| Model | DAITEM 330-23 330-23x |
| Part Number | DAITEM 951-21X 500798 |
| Specifications | 67.00 x 20.00 x 18.60 |
| Type | nickel_zinc |
| Battery Pack | 67.00 x 20.00 x 18.60 |
| Battery Type | nickel_zinc |
| Battery Capacity | 3350.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
Does the package include only the 3350 mAh nickel-zinc cell or are extra connectors supplied?
The box contains one replacement battery measuring 67.00 x 20.00 x 18.60 mm and weighing 52.0 g with a pre-fitted connector; no separate cables or chargers are included.
Is the 3350 mAh version the only capacity offered for the DAITEM 330-23 and 330-23x?
Yes, this model is supplied solely as a 3350 mAh / 12.40 Wh pack rated at 3.70 V for those part numbers.
What runtime can I expect from the 12.40 Wh rating once the battery is installed in the alarm panel?
The 12.40 Wh capacity at 3.70 V powers compatible DAITEM panels for the same duration as the original 500798 or 951-21X cells under normal indoor use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
