Cameron Sino BP130 3000mAh 4.8V NiMH Battery for Fluke ScopeMeter 123/124
Replacement NiMH pack delivers 3000mAh at 4.8V for Fluke ScopeMeter 123, 123S, 124 and 124S models
- Specifications88.95 x 42.97 x 22.48
- TypeNiMh
- Battery Pack88.95 x 42.97 x 22.48
- Battery TypeNiMh
- Battery Capacity3000.00 milliamp_hours
- Battery Voltage4.8 volts
- Direct replacement for Fluke ScopeMeter 123, 123S, 124, 124S models
- 3000 mAh NiMH capacity delivers 14.40 Wh for extended field use
- 8 V nominal voltage matches original equipment specifications exactly
- Compact 88.95 x 42.97 x 22.48 mm pack fits battery compartment precisely
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
Compatible Replacement Battery
This Cameron Sino NiMH battery replaces the Fluke BP130 pack in ScopeMeter 123, 123S, 124 and 124S instruments. It delivers 3000mAh at 4.8V for portable test and measurement work.
Upgrade From Worn Original Cells
When the factory pack no longer holds a full charge or shows reduced run-time, this unit restores the original capacity. The jump is worth it whenever field sessions are cut short by a depleted battery.
Capacity And Runtime Headroom
The 14.40Wh pack powers extended measurement sessions in survey and test environments. It runs out when continuous high-drain use exceeds the rated capacity, requiring a recharge cycle.
Highlights
- Direct replacement for Fluke ScopeMeter 123, 123S, 124, 124S models
- 3000 mAh NiMH capacity delivers 14.40 Wh for extended field use
- 8 V nominal voltage matches original equipment specifications exactly
- Compact 88.95 x 42.97 x 22.48 mm pack fits battery compartment precisely
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | ScopeMeter 123, ScopeMeter 123S, ScopeMeter 124, ScopeMeter 124S |
| Part Number | BP120MH, BP130 |
| Specifications | 88.95 x 42.97 x 22.48 |
| Type | NiMh |
| Battery Pack | 88.95 x 42.97 x 22.48 |
| Battery Type | NiMh |
| Battery Capacity | 3000.00 milliamp_hours |
| Battery Voltage | 4.8 volts |
Questions about this item
Will the 88.95 x 42.97 x 22.48 mm battery pack fit my Fluke ScopeMeter 123 battery compartment?
Yes, those exact dimensions match the original BP130 pack used in the ScopeMeter 123, 123S, 124 and 124S, so the pack slides straight into the existing bay.
How do I install the replacement pack, and what is the step most people miss?
Open the battery door, unplug the old connector, plug the new pack in firmly until the latch clicks, then close the door; the step often missed is ensuring the connector is fully seated before snapping the door shut.
When will this 3000 mAh NiMH pack need replacing, and how can I extend its life?
Expect several hundred charge cycles; run two or three full charge-and-discharge cycles when new, avoid storing above 60 °C, and use only the Fluke-approved charger to maximise lifespan.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



