Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00992025BTC
In stock
Cameron Sino BP120MH Battery 3000mAh 4.8V for Fluke 123/123S/43/43B/120
Nickel-zinc replacement battery delivers 3000 mAh at 4.8 V for Fluke 123, 123S, 43, 43B and 120 models
- Specifications88.16 x 43.77 x 22.42
- Typenickel_zinc
- Battery Pack88.16 x 43.77 x 22.42
- Battery Typenickel_zinc
- Battery Capacity3000.00 milliamp_hours
- Battery Voltage4.80 volts
- Compatible with Fluke 123, 123S, 43, 43B and Scopemeter 120
- 3000 mAh capacity at 4.8 V delivers 14.40 Wh of energy
- Nickel-zinc chemistry matches original battery specifications
- Built-in protection against overcharge, over-discharge and short circuit
- ISO 9001, RoHS and CE certified for quality assurance
Replacement battery for Fluke instruments
This nickel-zinc pack delivers 3000mAh at 4.8V and fits the Fluke 123, 123S, 43, 43B and Scopemeter 120 when the original part number is B11483 or BP120MH. It is built to the same dimensions and connector layout as the factory cell. The fully decoded chip communicates with the host device exactly like the original battery. Technicians carrying out equipment survey and test work can swap it in without tools.
Capacity and runtime
Rated at 3000mAh and 14.40Wh, the cell powers a typical measurement session for several hours before recharge is needed. Capacity drops off when the analyser drives its display and acquisition hardware at maximum rate for extended periods. Users running continuous logging or high-sample-rate captures will see shorter run times and should plan for a spare pack. The battery is not suited for applications that demand all-day operation without access to a charger.
Thermals and power behaviour
Normal charging and discharging stay within the safe temperature window defined by the protection circuitry. Over-charge, over-discharge, over-voltage and short-circuit guards prevent excessive heat build-up during regular use. The pack does not generate audible noise and draws only the current required by the connected instrument. Storage above 60 °C is discouraged to preserve cycle life.
Highlights
- Compatible with Fluke 123, 123S, 43, 43B and Scopemeter 120
- 3000 mAh capacity at 4.8 V delivers 14.40 Wh of energy
- Nickel-zinc chemistry matches original battery specifications
- Built-in protection against overcharge, over-discharge and short circuit
- ISO 9001, RoHS and CE certified for quality assurance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Fluke 123 ( Firmware below V2., Fluke 123S ( Firmware below V2, Fluke 43 Power Quality Analyze, Fluke 43B Power Quality Analyz, Quality Analyzer 43, Quality Analyzer 43B, Scope Meter BP123, Scope Meter BP124, Scopemeter 120 |
| Part Number | B11483, BP120 |
| Specifications | 88.16 x 43.77 x 22.42 |
| Type | nickel_zinc |
| Battery Pack | 88.16 x 43.77 x 22.42 |
| Battery Type | nickel_zinc |
| Battery Capacity | 3000.00 milliamp_hours |
| Battery Voltage | 4.80 volts |
Questions about this item
Will this 3000mAh 4.8V nickel-zinc pack power my Fluke 123 running firmware below V2 without modification?
Yes, it is a direct replacement for the original BP120MH and B11483 packs used in the 123 (firmware below V2), 123S (firmware below V2), 43, 43B and Scopemeter 120.
How can I verify the decoded chip is communicating correctly with my Fluke 43B after installation?
The fully decoded chip reports capacity and voltage to the analyser exactly like the original; the meter will display the 3000mAh / 14.40Wh rating and show normal charge-cycle counts.
Does the box include a charger or only the 88.16 x 43.77 x 22.42mm battery with shock-proof foam?
Only the single 221.6g battery pack is supplied; a compatible Fluke charger must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
