Cameron Sino BM7 Vet Elite 68L335-BIO-S 6700mAh 10.8V standard battery
Replacement lithium-polymer battery for the BM7 Vet Elite, 6700 mAh at 10.8 V
- Specifications110.00 x 66.00 x 19.00
- Typelithium_polymer
- Battery Pack110.00 x 66.00 x 19.00
- Battery Typelithium_polymer
- Battery Capacity6700.00 milliamp_hours
- Battery Voltage10.80 volts
- Compatible with BM7 Vet Elite devices
- 6700mAh capacity at 10.8V delivers 72.36Wh energy
- ISO9001 certified manufacturing ensures quality
- Overcharge, over-discharge and short-circuit protection built in
- New lithium polymer cell with fully decoded chip
Replacement Battery for BM7 Vet Elite
This lithium-polymer battery replaces the original pack in the BM7 Vet Elite veterinary monitor. It delivers 6700mAh at 10.8V for 72.36Wh of capacity. The unit is built to the same physical and electrical specifications as the factory cell.
Installation Guidance and Common Issues
Installation videos are widely available online and the fully decoded chip ensures plug-and-play operation. The main risk is an improperly seated connector, which prevents the monitor from recognising the pack. Using a low-quality third-party charger can also reduce cycle life.
Capacity and Voltage Determine Compatibility
The 6700mAh capacity at 10.8V must match the original battery's rating for correct runtime and charging behaviour. Verify the part numbers 68L335-BIO-S or BM-BAT-7 on your existing pack before ordering. Mismatched voltage or capacity will cause the device to reject the battery.
Highlights
- Compatible with BM7 Vet Elite devices
- 6700mAh capacity at 10.8V delivers 72.36Wh energy
- ISO9001 certified manufacturing ensures quality
- Overcharge, over-discharge and short-circuit protection built in
- New lithium polymer cell with fully decoded chip
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | BM7 Vet Elite |
| Part Number | 68L335-BIO-S, BM-BAT-7 |
| Specifications | 110.00 x 66.00 x 19.00 |
| Type | lithium_polymer |
| Battery Pack | 110.00 x 66.00 x 19.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 6700.00 milliamp_hours |
| Battery Voltage | 10.80 volts |
Questions about this item
How do I know the 6700mAh 10.8V battery is working correctly after I install it in my BM7 Vet Elite?
After fitting the 68L335-BIO-S pack, the BM7 Vet Elite should power on and run on battery alone; the new fully decoded chip reports charge level accurately, and capacity reaches its best after two or three full charge-discharge cycles.
What comes in the box with the BM7 Vet Elite replacement battery and do I need to buy anything else?
The package contains one lithium-polymer battery measuring 110.00 x 66.00 x 19.00 mm with shock-absorbing foam; no charger, cables or tools are included, so reuse your existing BM7 Vet Elite charger.
Which part number should I choose — 68L335-BIO-S or BM-BAT-7 — for my BM7 Vet Elite?
Both part numbers refer to the same 6700mAh 10.8V lithium-polymer battery built to the original specifications; select the one that matches the label on your current battery.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



