We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with dark casing and connector for Trimble GNSS equipment

Cameron Sino Battery Trimble R10 R10 GNSS V10 3600mAh 7.4V

SKU CH-YR36-CE6AT

Replacement lithium-ion battery delivers 3600 mAh at 7.4 V for Trimble R10, R10 GNSS and V10 survey equipment

  • Specifications78.45 x 54.20 x 25.14
  • Battery Pack78.45 x 54.20 x 25.14
  • Battery Capacity3600 milliamp_hours
  • Battery Voltage7.4 volts
  • 3600mAh capacity powers Trimble R10 GNSS through extended field sessions
  • 4V lithium-ion chemistry matches original equipment voltage exactly
  • Dimensions 78.45 x 54.20 x 25.14mm fit R10, R10 GNSS and V10 battery compartments
  • Replaces Trimble part numbers 76767, 89840-00 and 990373 without modification
  • Built-in protection guards against overcharge, over-discharge and short circuits

Trimble GNSS Replacement Battery

This Cameron Sino lithium-ion pack replaces the original Trimble 76767, 89840-00 and 990373 cells. It fits the R10, R10 GNSS and V10 survey receivers used in equipment, survey and test workflows. The 3600mAh capacity at 7.4 volts delivers 26.64Wh of energy for extended field sessions.

Compact Pack With Integrated Protection

The battery measures 78.45 x 54.20 x 25.14mm and weighs 155.8g, matching the OEM form factor for a direct swap. Built-in circuitry guards against overcharge, over-discharge, over-voltage and short circuits. A fully decoded chip communicates with the host device exactly like the factory unit. Shock-absorbing foam in the packaging protects the cell during transport.

Upgrade From Depleted OEM Cells

Survey crews replacing worn original batteries regain full runtime without changing chargers or mounting hardware. The jump is worth it when the existing pack no longer holds a charge through a full day or shows voltage sag under load. Buyers needing a different voltage, capacity or form factor for non-Trimble gear should look elsewhere.

Highlights

  • 3600mAh capacity powers Trimble R10 GNSS through extended field sessions
  • 4V lithium-ion chemistry matches original equipment voltage exactly
  • Dimensions 78.45 x 54.20 x 25.14mm fit R10, R10 GNSS and V10 battery compartments
  • Replaces Trimble part numbers 76767, 89840-00 and 990373 without modification
  • Built-in protection guards against overcharge, over-discharge and short circuits

Specifications

BrandCameron Sino
ModelR10, R10 GNSS, V10
Part Number76767, 89840-00, 990373
Specifications78.45 x 54.20 x 25.14
Battery Pack78.45 x 54.20 x 25.14
Battery Capacity3600 milliamp_hours
Battery Voltage7.4 volts

Questions about this item

What voltage does the 7.4 V lithium-ion pack deliver to the Trimble R10 GNSS?

The pack supplies a nominal 7.4 volts, matching the original Trimble specification for the R10, R10 GNSS and V10 receivers.

Will the 78.45 × 54.20 × 25.14 mm battery fit the Trimble V10 battery compartment?

Yes, those exact dimensions correspond to the Trimble 76767, 89840-00 and 990373 part numbers used in the V10.

How do I install the replacement pack and what step is often missed?

Remove the old pack, align the connector, press firmly until it clicks, then run two or three full charge-discharge cycles to reach rated capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.