Cameron Sino Battery LG G Pad III 8.0 G Pad X 8.3 VK815 BL-T17 4800mAh 3.8V
Replacement battery for LG G Pad III 8.0 and G Pad X 8.3 tablets with 4800mAh capacity and 3.8V output
- Specifications155.60 x 86.30 x 3.80
- Typenickel_zinc
- Battery Pack155.60 x 86.30 x 3.80
- Battery Typenickel_zinc
- Battery Capacity4800.00 milliamp_hours
- Battery Voltage3.80 volts
- Replaces original battery in LG G Pad III 8.0 and G Pad X 8.3 tablets
- 4800 mAh capacity at 3.8 V delivers 18.24 Wh of runtime
- Nickel-zinc chemistry matches OEM specifications for safe operation
- Built-in protection against overcharge, over-discharge and short circuits
- Exact 155.60 × 86.30 × 3.80 mm fit with fully decoded chip
Replacement Battery for LG Tablets
This Cameron Sino battery replaces the original power cell in the LG G Pad III 8.0, G Pad X 8.3 and VK815 tablets. It delivers a capacity of 4800mAh at 3.8 volts and uses nickel-zinc chemistry. The pack measures 155.60 x 86.30 x 3.80 millimetres and weighs 81.0 grams. A fully decoded chip ensures the tablet recognises the battery exactly as it did the factory unit.
Thermal Behaviour and Power Draw
Nickel-zinc chemistry runs at a nominal 3.8 volts and stores 18.24 watt-hours of energy. In normal tablet use the cell generates minimal heat and requires no active cooling. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short-circuit conditions, keeping power delivery stable throughout the discharge cycle.
Installation and Build Integration
The battery fits the existing compartment without modification, matching the original dimensions of 155.60 x 86.30 x 3.80 millimetres. No additional cables, brackets or thermal pads are required. Installation videos are widely available online for guidance. Buyers who need a higher capacity than 4800mAh or a different voltage will not be served by this pack.
Highlights
- Replaces original battery in LG G Pad III 8.0 and G Pad X 8.3 tablets
- 4800 mAh capacity at 3.8 V delivers 18.24 Wh of runtime
- Nickel-zinc chemistry matches OEM specifications for safe operation
- Built-in protection against overcharge, over-discharge and short circuits
- Exact 155.60 × 86.30 × 3.80 mm fit with fully decoded chip
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | G Pad III 8.0, G Pad X 8.3, VK815 |
| Part Number | BL-T17, EAC6278301 |
| Specifications | 155.60 x 86.30 x 3.80 |
| Type | nickel_zinc |
| Battery Pack | 155.60 x 86.30 x 3.80 |
| Battery Type | nickel_zinc |
| Battery Capacity | 4800.00 milliamp_hours |
| Battery Voltage | 3.80 volts |
Questions about this item
How do I install the BL-T17 battery in my LG G Pad III 8.0, and which step do people often miss?
Power off the tablet, remove the back cover, disconnect the old battery connector, fit the new 155.60 x 86.30 x 3.80 mm pack, reconnect the cable securely, then reassemble; the step most often missed is fully seating the connector before closing the case.
What maintenance or replacement will the BL-T17 battery need later?
The nickel_zinc 4800mAh cell gradually loses capacity over repeated charge cycles; expect to replace it once runtime drops below your needs, typically after several hundred full cycles.
What limit appears first during sustained use of the 3.8 V 4800mAh pack?
Under continuous load the 18.24 Wh capacity depletes first, so runtime ends before thermal or voltage protection engages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



