Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00998522BTC
In stock
Cameron Sino Battery KLN00928 8000mAh 7.4V for SPS850 851 852 855
Replacement battery for SPS850, SPS851, SPS852 and SPS855 modular receivers delivering 8000 mAh at 7.4 V
- Specifications120.00 x 101.50 x 9.80
- Battery Pack120.00 x 101.50 x 9.80
- Battery Capacity8000 milliamp_hours
- Battery Voltage7.4 volts
- Extended runtime for survey gear with 8000mAh capacity
- Reliable 7.4V power for SPS850 851 852 855 receivers
- Slim 120.00 x 101.50 x 9.80mm design fits original slot
- Certified ISO9001 RoHS CE for safe operation
- Built-in protection guards against overcharge and short circuits
Replacement Battery for SPS Receivers
The Cameron Sino KLN00928 is a new 8000mAh lithium-ion pack rated at 7.4 volts. It is built to match the original specifications for the SPS850, SPS851, SPS852 and SPS855 modular receivers used in survey and test equipment. A fully decoded chip ensures the battery communicates correctly with the host device. It is not suited for users needing a different voltage or form factor.
Thermals and Power Behaviour
The 59.20Wh capacity supports extended field sessions without frequent recharging. Built-in protection circuits guard against overcharge, over-discharge, over-voltage and short-circuit events, which helps maintain stable output and cell longevity. The pack weighs 250.0 grams, keeping the receiver balance familiar during handheld use. No active cooling or noise considerations apply to this sealed battery module.
Physical Build and Daily Handling
The hard-case dimensions are 120.00 by 101.50 by 9.80 millimetres, matching the OEM battery compartment exactly. A replacement foam insert is included in the package to protect the cells during transport. Installation is straightforward and supported by widely available online videos. Buyers whose equipment uses a different battery footprint or connector layout cannot use this pack.
Highlights
- Extended runtime for survey gear with 8000mAh capacity
- Reliable 7.4V power for SPS850 851 852 855 receivers
- Slim 120.00 x 101.50 x 9.80mm design fits original slot
- Certified ISO9001 RoHS CE for safe operation
- Built-in protection guards against overcharge and short circuits
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | SPS850 Modular Receiver, SPS851 Modular Receiver, SPS852 Modular Receiver, SPS855 Modular Receiver |
| Part Number | KLN00928 |
| Specifications | 120.00 x 101.50 x 9.80 |
| Battery Pack | 120.00 x 101.50 x 9.80 |
| Battery Capacity | 8000 milliamp_hours |
| Battery Voltage | 7.4 volts |
Questions about this item
How do I install the KLN00928 battery in my SPS850 receiver and what step is often missed?
Slide the pack into the modular receiver bay until the latch clicks, then run a full charge cycle before first field use; the step most often missed is that initial calibration charge.
What maintenance will the 8000mAh pack need over its service life?
Store at roughly half charge if unused for weeks, keep contacts clean, and expect to replace the pack once run-time drops below useful levels for survey work.
What limit appears first during continuous operation of the 7.4V battery?
The 59.20Wh capacity sets the runtime ceiling; sustained high-draw operation will hit that energy limit before thermal protection activates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
