Cameron Sino Battery for Wacom Cintiq Companion 2 DTH-W1300 8000mAh 7.6V
Replacement lithium-ion battery delivering 8000 mAh at 7.6 V for the Wacom Cintiq Companion 2 DTH-W1300
- Specifications182.00 x 146.00 x 7.20
- Battery Pack182.00 x 146.00 x 7.20
- Battery Capacity8000.00 milliamp_hours
- Battery Voltage7.6 volts
- 8000 mAh capacity powers the Cintiq Companion 2 for extended creative sessions
- 6 V lithium-ion cell matches the original G6BTA007H specifications exactly
- 182 × 146 × 7.20 mm form factor fits the DTH-W1300 battery bay without modification
- Built-in protection guards against overcharge, over-discharge and short circuits
- ISO 9001, RoHS and CE certified for safety and quality assurance
Replacement battery for Cintiq Companion 2
This lithium-ion pack replaces the original Wacom G6BTA007H cell inside the Cintiq Companion 2 DTH-W1300 tablet. It delivers 8000mAh at 7.6V for 59.20Wh of capacity. The fully decoded chip communicates with the device exactly like the factory unit. Builders and artists who need a fresh power source for this specific model will find a direct fit.
Thermals and protection features
Integrated circuitry guards against overcharge, over-discharge, over-voltage and short-circuit conditions to preserve cell health. The supplier notes the battery reaches its best performance after two or three complete charge and discharge cycles. No cooling hardware is included; the pack relies on the tablet's existing thermal design during normal operation.
Installation and packaging notes
Dimensions measure 182.00 x 146.00 x 7.20mm and the unit weighs 313.4g, matching the original form factor. Shock-absorbing foam protects the cell during transport. Buyers who cannot open the tablet or verify the part number against their device should seek professional assistance before purchasing.
Highlights
- 8000 mAh capacity powers the Cintiq Companion 2 for extended creative sessions
- 6 V lithium-ion cell matches the original G6BTA007H specifications exactly
- 182 × 146 × 7.20 mm form factor fits the DTH-W1300 battery bay without modification
- Built-in protection guards against overcharge, over-discharge and short circuits
- ISO 9001, RoHS and CE certified for safety and quality assurance
Specifications
| Brand | cameron sino |
|---|---|
| Model | Cintiq Companion 2, DTH-W1300 |
| Part Number | G6BTA007H |
| Specifications | 182.00 x 146.00 x 7.20 |
| Battery Pack | 182.00 x 146.00 x 7.20 |
| Battery Capacity | 8000.00 milliamp_hours |
| Battery Voltage | 7.6 volts |
Questions about this item
How do I install the 182.00 x 146.00 x 7.20 mm battery in my DTH-W1300, and what step do people often miss?
Open the tablet, disconnect the old pack, then connect the new battery's decoded chip connector firmly until it clicks; the step many miss is seating the connector fully so the chip communicates with the system.
What maintenance will this 8000mAh lithium-ion pack need later?
Run two or three full charge and discharge cycles when new to reach best performance, avoid low-quality chargers, and store below 60 °C / 140 °F when not in use.
What limit appears first during sustained heavy use of this 59.20 Wh replacement?
Thermal protection activates if the pack approaches 60 °C / 140 °F, throttling output to prevent overheating before the 8000 mAh capacity is fully drained.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



