Cameron Sino Battery for Vertex FT Series FNB-41/42 1000mAh 9.6V
Replacement 9.6 V 1000 mAh lithium-ion pack for Vertex FT-series two-way radios
- Specifications84.00 x 67.00 x 35.00
- Battery Pack84.00 x 67.00 x 35.00
- Battery Capacity1000.00 milliamp_hours
- Battery Voltage9.60 volts
- Compatible with Vertex FT-10, FT-40, FT-50 and VXA-100 radios
- 1000mAh capacity at 9.6V for reliable talk time
- Dimensions 84.00 x 67.00 x 35.00mm fit original battery slot
- Certified to ISO9001, RoHS and CE standards for safety
- Built-in overcharge, over-discharge and short-circuit protection
Compatible Vertex radios
This replacement battery fits Vertex FT-10, FT-10R, FT-40, FT-40R, FT-50, FT-50R and VXA-100 two-way radios. It matches part numbers FNB-41 and FNB-42. The pack uses lithium-ion chemistry and delivers 1000mAh at 9.6V. It is built to the same physical dimensions as the original unit.
Thermals and daily operation
The battery includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. A fully decoded chip communicates with the radio exactly like the factory pack. Normal use stays within safe temperature limits without active cooling. No noise or power-draw figures are published for this accessory.
Sustained transmit behaviour
After two or three full charge cycles the pack reaches its rated capacity for extended transmit sessions. Protection circuits prevent damage during prolonged high-current draw. The 1000mAh rating supports typical duty cycles but will not last through continuous heavy use without recharging. Buyers needing longer runtimes should consider higher-capacity alternatives.
Highlights
- Compatible with Vertex FT-10, FT-40, FT-50 and VXA-100 radios
- 1000mAh capacity at 9.6V for reliable talk time
- Dimensions 84.00 x 67.00 x 35.00mm fit original battery slot
- Certified to ISO9001, RoHS and CE standards for safety
- Built-in overcharge, over-discharge and short-circuit protection
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | FT-10, FT-10R, FT-40, FT-40R, FT-50, FT-50R, VXA-100 |
| Part Number | FNB-41, FNB-42 |
| Specifications | 84.00 x 67.00 x 35.00 |
| Battery Pack | 84.00 x 67.00 x 35.00 |
| Battery Capacity | 1000.00 milliamp_hours |
| Battery Voltage | 9.60 volts |
Questions about this item
How do I install this battery in my Vertex FT-40 and what step is often missed?
Slide the pack into the radio until the latch clicks; the step people miss is fully seating the connector so the decoded chip registers with the radio.
What maintenance will this 1000mAh 9.6V pack need later?
Run two or three full charge and discharge cycles when new; afterwards recharge before storage and keep the pack out of environments above 60°C.
What limit appears first during a long transmission session?
The 1000mAh capacity sets the talk time; once depleted the pack must be recharged before further use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
