Cameron Sino Battery for Soundcast MLD414 Outcast Melody 5200mAh 19.24Wh
Replacement lithium-ion battery delivering 5200 mAh at 10.8 V for Soundcast MLD414 and Outcast Melody speakers
- Weight161.4
- Replacement battery for Soundcast MLD414 and Outcast Melody
- 5200mAh capacity delivering 19.24Wh at 10.8 volts
- Certified to ISO9001, RoHS and CE safety standards
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Fully decoded chip works like the original battery
Direct replacement battery
This Cameron Sino unit replaces the original power cell in Soundcast MLD414 and Outcast Melody wireless speakers. It matches the factory part number 2-540-006-01 and delivers 5200mAh at 10.8 volts for 19.24Wh of capacity. The pack uses lithium-ion chemistry and includes a fully decoded chip that communicates with the speaker exactly like the original.
Thermal and power behaviour
Normal operation stays within the rated 10.8 volt output without triggering the built-in over-voltage or short-circuit safeguards. The protection circuit also prevents over-charge and over-discharge, limiting heat build-up during extended playback. No active cooling is required and the cell runs silently inside the sealed speaker cabinet.
Build and daily handling
The battery measures 65.96 by 36.80 by 18.90 millimetres and weighs 91.4 grams, fitting the original compartment without modification. Shock-absorbing foam in the packaging protects the cell during transit. Installers should verify the connector seats fully before closing the enclosure, and avoid chargers that fall below the speaker's specified input quality.
Highlights
- Replacement battery for Soundcast MLD414 and Outcast Melody
- 5200mAh capacity delivering 19.24Wh at 10.8 volts
- Certified to ISO9001, RoHS and CE safety standards
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Fully decoded chip works like the original battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | MLD414, Outcast Melody |
| Part Number | 2-540-006-01 |
| Weight | 161.4 |
Questions about this item
How do I install the replacement battery in my Soundcast MLD414 and what connector step must I get right?
Open the speaker's battery compartment, remove the old pack, align the new battery's connector with the device socket and press firmly until it clicks; the supplier stresses verifying the connector is properly seated before closing the cover.
What maintenance will this 5200mAh lithium-ion pack need and when should I replace it?
Run two or three full charge and discharge cycles when new to reach full capacity; thereafter avoid low-quality chargers and store below 60 °C, replacing the pack once runtime becomes too short for your needs.
What is the first limit I will hit during sustained high-volume playback with this 10.8 V battery?
The pack's 19.24 Wh capacity sets the runtime ceiling; at high output the speaker will drain the 5200 mAh cells until the protection circuit cuts power to prevent over-discharge.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



