Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00999639BTC
In stock
Cameron Sino Battery for Medigas PM 3010 N2O Monitor 2000mAh 7.20Wh
Nickel-zinc replacement battery delivers 2000mAh at 3.60V for Medigas PM 3010 N2O monitors
- Specifications53.30 x 27.70 x 30.00
- Typenickel_zinc
- Battery Pack53.30 x 27.70 x 30.00
- Battery Typenickel_zinc
- Battery Capacity2000.00 milliamp_hours
- Battery Voltage3.60 volts
- Replacement battery for Medigas PM 3010 N2O monitor
- 2000 mAh capacity at 3.60 V for reliable runtime
- Nickel-zinc chemistry with 7.20 Wh energy rating
- Compact 53.30 × 27.70 × 30.00 mm form factor
- Matches original part number B11967 for direct fit
Replacement Battery for N2O Monitor
This Cameron Sino battery replaces the original power cell in the Medigas PM 3010 N2O monitor. It delivers 2000mAh capacity at 3.60 volts using nickel-zinc chemistry. The pack measures 53.30 x 27.70 x 30.00 millimetres and carries ISO9001, RoHS and CE certifications. It is a direct fit for part number B11967.
Suits clinical engineers maintaining Medigas
Technicians who need a certified spare for the PM 3010 monitor will find the correct voltage and connector here. Buyers looking for a battery for a different medical device or a higher capacity cell should verify their original part number first. This unit is not compatible with the Electrolux vacuum models listed in the broader compatibility data.
2000mAh nickel-zinc cell at 3.60 volts
The single specification that confirms fit is the 2000mAh capacity combined with the 3.60 volt nominal output in the 53.30 x 27.70 x 30.00 millimetre form factor. Match these figures against the original battery label before ordering. No other capacity or voltage variant is supplied for this part number.
Highlights
- Replacement battery for Medigas PM 3010 N2O monitor
- 2000 mAh capacity at 3.60 V for reliable runtime
- Nickel-zinc chemistry with 7.20 Wh energy rating
- Compact 53.30 × 27.70 × 30.00 mm form factor
- Matches original part number B11967 for direct fit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Bacharach Medigas PM 3010 N2O Monitor |
| Part Number | Bacharach B11967 |
| Specifications | 53.30 x 27.70 x 30.00 |
| Type | nickel_zinc |
| Battery Pack | 53.30 x 27.70 x 30.00 |
| Battery Type | nickel_zinc |
| Battery Capacity | 2000.00 milliamp_hours |
| Battery Voltage | 3.60 volts |
Questions about this item
How do I install the Cameron Sino battery in my Medigas PM 3010 N2O monitor, and which step is often missed?
Insert the pack so the 53.30 x 27.70 x 30.00 mm dimensions align with the compartment, then press the connector firmly until it clicks; the step most often missed is verifying the connector is fully seated before closing the cover.
What maintenance will this nickel-zinc 2000mAh 7.20Wh battery need later?
After 2 or 3 full charge and discharge cycles the pack reaches its best performance; thereafter store it below 60 °C, avoid fire or water, and replace the cell when runtime drops below your clinical requirements.
What limit appears first during continuous monitoring with this 3.60 V pack?
The 2000 mAh capacity sets the runtime ceiling; under sustained use the monitor will shut down once the charge is depleted, so plan for a recharge or swap before the next procedure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
