Cameron Sino Battery for Ledlenser Torche P5R P5R.2 7703 800mAh 2.96Wh 3.7V
Replacement lithium-polymer cell delivering 800 mAh at 3.7 V for Ledlenser P5R and P5R.2 torches, matching part 7703 with ISO 9001, RoHS and CE certification
- Reliable power for Ledlenser P5R torches with 800mAh capacity
- Certified safety through ISO9001, RoHS and CE compliance
- Exact-fit replacement matching original 7703 part number
- Lithium polymer cell delivers 3.7V and 2.96Wh energy
- Ready to install with fully decoded chip for original performance
Replacement Battery for Ledlenser P5R & P5R.2
This Cameron Sino battery replaces the original 7703 cell in Ledlenser Torche P5R and P5R.2 torches. It delivers 800mAh capacity at 3.7V with 2.96Wh energy rating. The lithium polymer pack includes a fully decoded chip for direct compatibility. Builders needing a different form factor or voltage should look elsewhere.
Upgrades from depleted or aging OEM cells
The pack restores runtime when the original battery no longer holds charge or shows reduced output. A jump is worth it when the torch cuts out early or requires frequent recharging. The new cell reaches peak performance after two or three full charge cycles. Users whose torch uses a different part number cannot use this pack.
Check the device model
Verify the torch is a Torche P5R or P5R.2 and that the original battery carries part number 7703. Confirm the connector matches the existing layout for proper installation. Avoid low-quality third-party chargers to preserve cell life. The pack measures 52.00 x 14.20mm for reference.
Highlights
- Reliable power for Ledlenser P5R torches with 800mAh capacity
- Certified safety through ISO9001, RoHS and CE compliance
- Exact-fit replacement matching original 7703 part number
- Lithium polymer cell delivers 3.7V and 2.96Wh energy
- Ready to install with fully decoded chip for original performance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Torche P5R, Torche P5R.2 |
| Part Number | 7703 |
Questions about this item
What dimensions does the 52.00 x 14.20mm battery need to fit inside the Ledlenser P5R or P5R.2?
The replacement cell measures 52.00mm long by 14.20mm wide and is designed to sit in the torch's internal battery compartment without modification.
How do I install the battery and which step is most often missed?
Insert the cell so its connector seats fully into the torch's socket; the step users skip is verifying the connector clicks into place before closing the housing.
When will the 800mAh lithium-polymer cell need replacing and how can I extend its life?
Expect several hundred charge cycles; avoid deep discharges, use only the supplied charger, and store at roughly half charge if the torch is unused for weeks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
