Cameron Sino Battery for Icom IC-A22/A22E/A3/A3E BP-166 1000mAh 12.0V
Replacement lithium-ion pack delivers 1000 mAh at 12.0 V for Icom IC-A22, IC-A22E, IC-A3 and IC-A3E two-way radios
- Specifications73.76 x 57.10 x 35.80
- Battery Pack73.76 x 57.10 x 35.80
- Battery Capacity1000.00 milliamp_hours
- Battery Voltage12.00 volts
- Direct replacement for Icom IC-A22, IC-A22E, IC-A3 and IC-A3E two-way radios
- 1000 mAh capacity at 12.0 V delivers reliable transmit power
- 76 x 57.10 x 35.80 mm form factor fits the original battery compartment
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Certified to ISO 9001, RoHS and CE standards for safety and quality
Compatible replacement battery
This Cameron Sino battery replaces the Icom BP-166, CM-166 and CM-166S packs used in the IC-A22, IC-A22E, IC-A3 and IC-A3E two-way radios. It supplies 12.0 V and 1000 mAh capacity in a lithium-ion cell. The pack measures 73.76 x 57.10 x 35.80 mm and weighs 250.0 g. It is built to the original specifications with a fully decoded chip.
Voltage and capacity constraints
The radio requires a 12.0 V supply; this pack delivers exactly that voltage and 1000 mAh capacity. A new battery reaches its best performance after two or three complete charge and discharge cycles. Using a low-quality third-party charger will shorten the battery's life. Do not disassemble the pack or expose it to fire or water.
1000 mAh capacity decides suitability
The 1000 mAh rating determines how long the radio operates between charges. If your application demands longer run time than this capacity provides, this pack will not meet the need. Verify the part number on your original battery matches BP-166, CM-166 or CM-166S before purchase.
Highlights
- Direct replacement for Icom IC-A22, IC-A22E, IC-A3 and IC-A3E two-way radios
- 1000 mAh capacity at 12.0 V delivers reliable transmit power
- 76 x 57.10 x 35.80 mm form factor fits the original battery compartment
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Certified to ISO 9001, RoHS and CE standards for safety and quality
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | IC-A22, IC-A22E, IC-A3, IC-A3E |
| Part Number | BP-166, CM-166, CM-166S |
| Specifications | 73.76 x 57.10 x 35.80 |
| Battery Pack | 73.76 x 57.10 x 35.80 |
| Battery Capacity | 1000.00 milliamp_hours |
| Battery Voltage | 12.00 volts |
Questions about this item
Which Icom radio models does the BP-166 battery fit?
This replacement battery is compatible with Icom IC-A22, IC-A22E, IC-A3 and IC-A3E two-way radios, matching original part numbers BP-166, CM-166 and CM-166S.
What runtime can I expect from the 1000mAh capacity in my radio?
The 1000mAh lithium-ion pack delivers 12.00Wh at 12.0V, providing a direct replacement for the original BP-166 with identical voltage and capacity for standard operating time.
Does the 12.0V output match the original charger requirements?
Yes, the battery supplies 12.0 volts, matching the original specification, and includes a fully decoded chip so it works with the standard Icom charger and radio protection circuits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
