We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack with black finish, 79.30 by 25.00 by 29.30 mm, two-wire connector visible

Cameron Sino Battery for Hetronic ERGO-S 68303700 3400mAh 12.58Wh

SKU CH-684Q-YCBYJ

Replacement lithium-polymer pack for Hetronic ERGO-S crane remotes, 3400 mAh at 3.7 V with ISO 9001, RoHS and CE certification

  • Specifications79.30 x 25.00 x 29.30
  • Typelithium_polymer
  • Battery Pack79.30 x 25.00 x 29.30
  • Battery Typelithium_polymer
  • Battery Capacity3400.00 milliamp_hours
  • Battery Voltage3.70 volts
  • Direct replacement for Hetronic ERGO-S remote
  • 3400mAh capacity delivers 12.58Wh of runtime
  • 7V lithium-polymer chemistry matches original spec
  • ISO9001, RoHS and CE certified for safety
  • Compact 79.30 x 25.00 x 29.30mm form factor

Direct replacement for Hetronic ERGO-S

This lithium-polymer battery matches the original Hetronic 68303700 specification. It delivers 3400mAh at 3.7 volts for 12.58Wh of capacity. The pack measures 79.30 x 25.00 x 29.30mm and weighs 68.0g. It is built for indoor and outdoor use with crane remote controls.

Fits the existing battery compartment exactly

No adapter or wiring changes are required because the connector and dimensions mirror the factory pack. The fully decoded chip communicates with the ERGO-S electronics without additional configuration. A fresh cell reaches full performance after two or three complete charge cycles. The sealed housing protects the cell during handling and transport.

Built-in protection and quality certifications

Overcharge, over-discharge, over-voltage and short-circuit circuits guard the pack during every session. Production follows ISO9001, RoHS and CE standards. Shock-absorbing foam in the package prevents transit damage. Cameron Sino provides email support within 24 hours and a 12-month warranty on the battery.

Highlights

  • Direct replacement for Hetronic ERGO-S remote
  • 3400mAh capacity delivers 12.58Wh of runtime
  • 7V lithium-polymer chemistry matches original spec
  • ISO9001, RoHS and CE certified for safety
  • Compact 79.30 x 25.00 x 29.30mm form factor

Specifications

Brandcameron sino
ModelHetronic ERGO-S
Part NumberHetronic 68303700
Specifications79.30 x 25.00 x 29.30
Typelithium_polymer
Battery Pack79.30 x 25.00 x 29.30
Battery Typelithium_polymer
Battery Capacity3400.00 milliamp_hours
Battery Voltage3.70 volts

Questions about this item

How long does the 3400 mAh capacity last under continuous load before voltage drops?

The 3400 mAh lithium-polymer cell delivers 12.58 Wh at 3.70 V; run-time depends on the remote's current draw, so divide 3400 mAh by the device's average milliamps to estimate hours.

Does the pack run hot or make noise during all-day operation?

Lithium-polymer chemistry has no moving parts, so the battery is silent; heat rises only with high discharge rates — normal remote-control use stays well within the cell's thermal limits.

What must I already own to install and charge this replacement?

You need the Hetronic ERGO-S remote (part 68303700) and its original charger; the pack includes a decoded chip that mates with the existing connector, so no extra hardware is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.