Cameron Sino Battery for Garmin DriveAssist 50 LMT-D, Driveluxe 50 LMTHD 750mAh 3.7V
Replacement lithium-ion battery for Garmin DriveAssist and Driveluxe GPS units, 750 mAh at 3.7 V with integrated protection circuit
- Specifications48.20 x 34.00 x 4.60mm
- Battery Pack48.20 x 34.00 x 4.60mm
- Battery Capacity750 milliamp_hours
- Battery Voltage3.7 volts
- Replacement battery fits Garmin DriveAssist 50 LMT-D and Driveluxe 50 LMTHD
- 750mAh capacity at 3.7V delivers 2.78Wh for extended GPS use
- Slim 48.20 x 34.00 x 4.60mm form factor matches original dimensions
- Built-in protection guards against overcharge, over-discharge and short circuits
- ISO9001, RoHS and CE certified for safety and quality assurance
Direct Replacement Battery
This Cameron Sino lithium-ion cell matches the original 361-00056-21 pack fitted to Garmin DriveAssist 50 LMT-D and Driveluxe 50 LMTHD navigators. It delivers 750mAh at 3.7V and fits the 48.20 x 34.00 x 4.60mm cavity without modification. The integrated protection circuit guards against overcharge, over-discharge and short circuit.
Upgrade From Depleted Original
When the factory cell no longer holds a charge through a full day of routing, this unit restores the same 2.78Wh capacity in a new condition pack. The jump is worth it once the device shuts down prematurely or requires constant external power. Buyers who need a higher capacity than 750mAh cannot be served by this model.
Steady Output on Long Drives
Under continuous navigation the cell maintains a stable 3.7V rail without the voltage sag seen in aged batteries. The protection circuitry prevents thermal stress during multi-hour sessions, and the pack reaches full performance after two or three complete charge cycles. No active cooling is required in the sealed navigator housing.
Highlights
- Replacement battery fits Garmin DriveAssist 50 LMT-D and Driveluxe 50 LMTHD
- 750mAh capacity at 3.7V delivers 2.78Wh for extended GPS use
- Slim 48.20 x 34.00 x 4.60mm form factor matches original dimensions
- Built-in protection guards against overcharge, over-discharge and short circuits
- ISO9001, RoHS and CE certified for safety and quality assurance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | 010-01531-00, DriveAssist 50 LMT-D, DriveAssist 51 LMTS, DriveAssist 51 LMT-S, Driveluxe 50 LMTHD |
| Part Number | 361-00056-21 |
| Specifications | 48.20 x 34.00 x 4.60mm |
| Battery Pack | 48.20 x 34.00 x 4.60mm |
| Battery Capacity | 750 milliamp_hours |
| Battery Voltage | 3.7 volts |
Questions about this item
Will the 48.20 x 34.00 x 4.60 mm battery fit inside my DriveAssist 50 LMT-D?
Yes, those are the exact dimensions of the original pack so it slots into the same compartment without modification.
What is the installation step people most often miss when fitting this 361-00056-21 battery?
Fully seating the connector; a loose plug will leave the unit dead even though the battery itself is good.
How many charge cycles until the 750 mAh lithium-ion cell reaches its rated capacity?
Two or three full charge and discharge cycles are needed before the pack delivers its best runtime.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



