Cameron Sino Battery for Fulham HotSpot FHSCP-UNV-10P-L-SD 3600mAh 9.6V
Nickel-zinc replacement battery for Fulham HotSpot emergency lighting delivers 3600 mAh at 9.6 V in a 198 × 37.1 × 21.6 mm pack
- Typenickel_zinc
- Battery Typenickel_zinc
- Battery Capacity3600 milliamp_hours
- Battery Voltage9.6 volts
- Direct replacement for Fulham HotSpot FHSCP-UNV-10P-L-SD
- 3600 mAh capacity at 9.6 V delivers 34.56 Wh of energy
- Nickel-zinc chemistry with built-in protection against overcharge and short circuit
- Certified to ISO 9001, RoHS and CE standards for safety and quality
- Compact 198.00 × 37.10 × 21.60 mm design weighs 272.0 g for easy installation
Direct replacement for Fulham HotSpot
This nickel-zinc battery pack is built to match the original IFR18650E 3S2P part used in Fulham HotSpot emergency lighting units. It delivers 9.6 volts and 3600 milliamp hours for compatible fixtures. Installers can swap the pack without adapting wiring or connectors.
Nickel-zinc chemistry limits sustained high-rate
The 9.6 volt, 34.56 watt-hour pack uses nickel-zinc cells that are sensitive to deep discharge and extreme heat. Operation above 60 degrees Celsius or storage above 140 degrees Fahrenheit will shorten service life. A proper charge cycle is required before the pack reaches full capacity.
198.00 x 37.10 x 21.60 millimetres decides fit
The pack measures 198.00 by 37.10 by 21.60 millimetres and weighs 272.0 grams. Verify the battery compartment dimensions against these figures before ordering. Units with smaller cavities or different connector spacing will not accept this pack.
Highlights
- Direct replacement for Fulham HotSpot FHSCP-UNV-10P-L-SD
- 3600 mAh capacity at 9.6 V delivers 34.56 Wh of energy
- Nickel-zinc chemistry with built-in protection against overcharge and short circuit
- Certified to ISO 9001, RoHS and CE standards for safety and quality
- Compact 198.00 × 37.10 × 21.60 mm design weighs 272.0 g for easy installation
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | HotSpot FHSCP-UNV-10P-L-SD |
| Part Number | IFR18650E 3S2P |
| Type | nickel_zinc |
| Battery Type | nickel_zinc |
| Battery Capacity | 3600 milliamp_hours |
| Battery Voltage | 9.6 volts |
Questions about this item
Is the 3600mAh 9.6V version the only capacity offered for the Fulham HotSpot FHSCP-UNV-10P-L-SD?
Yes, this replacement battery is supplied in a single 3600mAh / 34.56Wh configuration at 9.6 volts, matching the original IFR18650E 3S2P specification for the HotSpot unit.
What runtime can I expect from the 34.56Wh rating in my emergency lighting fixture?
The 34.56 watt-hour capacity delivers the same energy as the original pack, so runtime will match factory specifications for the Fulham HotSpot FHSCP-UNV-10P-L-SD under standard test conditions.
Does the nickel-zinc chemistry require a specific charging interface or voltage limit?
The pack includes a fully decoded chip that communicates with the Fulham HotSpot charger, ensuring correct 9.6V charging parameters and built-in overcharge, over-discharge and short-circuit protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



