Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00999543BTC
In stock
Cameron Sino Battery for FLIR i3 i5 i7 IRC40 2200mAh 8.14Wh
Replacement lithium-ion battery delivers 2200 mAh and 8.14 Wh for FLIR i3, i5, i7 and IRC40 thermal cameras
- Typelithium_ion
- Pack68.50 x 18.50 x 16.50
- Chemicallithium_ion
- Capacity2200.00 milliamp_hours
- CompatibilityRadio
- Extended shooting time with 2200 mAh / 8.14 Wh capacity
- Reliable power from 3.7 V lithium-ion chemistry
- Fits FLIR i3, i5, i7 and IRC40 thermal cameras
- Compact 68.50 x 18.50 x 16.50 mm size for easy carry
- Built-in protection against overcharge, over-discharge and short circuit
Compatible Thermal Camera Battery
This Cameron Sino lithium-ion battery replaces the original power pack for FLIR i3, i5, i7 and IRC40 thermal cameras. It matches the factory specifications with a 2200mAh capacity and 8.14Wh energy rating at 3.7 volts. Technicians and inspectors who rely on these imagers for daily surveys can carry a spare to avoid downtime in the field.
Simple Swap-In Installation
The pack slides into the camera's battery compartment and connects with the original connector; no soldering or adapter is required. A fully decoded chip communicates with the camera firmware so the fuel gauge reads correctly from the first charge. The most common issue is a loose connector seat — press firmly until you feel the click, then verify the charge indicator lights.
Check Model And Part Numbers First
Confirm that your device is listed as FLIR i3, i5, i7 or IRC40 and that the original battery carries part number 1950986, T197410, T198470ACC or T199376ACC. The replacement measures 68.50 by 18.50 by 16.50 millimetres and weighs 46.9 grams, so the battery door must close without forcing. Charge only with the camera's approved charger to protect the built-in over-voltage and short-circuit safeguards.
Highlights
- Extended shooting time with 2200 mAh / 8.14 Wh capacity
- Reliable power from 3.7 V lithium-ion chemistry
- Fits FLIR i3, i5, i7 and IRC40 thermal cameras
- Compact 68.50 x 18.50 x 16.50 mm size for easy carry
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Flir i7, i5 Infrared Camera |
| Part Number | 1950986, T197410 |
| Type | lithium_ion |
| Pack | 68.50 x 18.50 x 16.50 |
| Chemical | lithium_ion |
| Capacity | 2200.00 milliamp_hours |
| Compatibility | Radio |
Questions about this item
How can I confirm the Cameron Sino battery is working correctly after installing it in my FLIR i7?
After installation the thermal camera should power on and run for a typical session; a new pack reaches full capacity after two or three complete charge and discharge cycles.
What comes in the box with the Cameron Sino battery and what must I supply separately?
The package contains one lithium-ion battery with shock-absorbing foam; you will need to use your existing FLIR charger or a compatible 3.7 V charging source.
Which part number should I match to choose the right version for my FLIR i5?
Verify that your original battery carries part number 1950986 or T197410; this pack replaces both and fits the i3, i5, i7 and IRC40 models.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
