Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01001193BTC
In stock
Cameron Sino Battery for Dustin PET24-7-213 2600mAh 14.4V
Replacement lithium-polymer battery for Dustin PET24-7-213 with 2600mAh capacity and 14.4V output
- Specifications69.50 x 37.50 x 37.00
- Typelithium_polymer
- Battery Pack69.50 x 37.50 x 37.00
- Battery Typelithium_polymer
- Battery Capacity2600.00 milliamp_hours
- Battery Voltage14.40 volts
- Replacement battery fits Dustin PET24-7-213 devices
- 2600 mAh capacity delivers 37.44 Wh runtime
- 4 V output matches original specification
- Lithium polymer cells with overcharge and short-circuit protection
- Compact 69.50 × 37.50 × 37.00 mm form factor
Replacement battery for Dustin PET24-7-213
This lithium-polymer pack replaces the original battery in the Dustin PET24-7-213 robotic vacuum. It delivers the same 14.4 V output and 2600 mAh capacity, so run-time matches the factory specification. The fully decoded chip communicates with the device exactly like the stock unit. No soldering is required; the connector plugs directly into the existing harness.
Capacity and practical runtime
Rated at 2600 mAh and 37.44 Wh, the pack powers typical cleaning cycles before needing a recharge. Heavy carpet or max-power modes will drain it faster, while light sweeping on hard floors extends the interval. The integrated protection circuit guards against over-charge, over-discharge, over-voltage and short circuits. After two or three full charge-discharge cycles the cells reach their full usable capacity.
Installation and build considerations
The pack measures 69.50 x 37.50 x 37.00 mm and weighs 191.0 g, fitting the original battery bay without modification. Verify the part number INR18650-4S1P on your old battery before ordering. A standard charger supplied with the vacuum is sufficient; avoid low-quality third-party adapters that can shorten cell life. The package includes shock-absorbing foam for safe transit.
Highlights
- Replacement battery fits Dustin PET24-7-213 devices
- 2600 mAh capacity delivers 37.44 Wh runtime
- 4 V output matches original specification
- Lithium polymer cells with overcharge and short-circuit protection
- Compact 69.50 × 37.50 × 37.00 mm form factor
Specifications
| Brand | cameron Sion |
|---|---|
| Model | Replacement for |
| Part Number | Bobsweep Dustin PET24-7-213 |
| Specifications | 69.50 x 37.50 x 37.00 |
| Type | lithium_polymer |
| Battery Pack | 69.50 x 37.50 x 37.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 2600.00 milliamp_hours |
| Battery Voltage | 14.40 volts |
Questions about this item
Will the 69.50 x 37.50 x 37.00 mm pack fit the original battery bay on my Dustin PET24-7-213?
Yes — the replacement is built to the exact 69.50 x 37.50 x 37.00 mm dimensions of the original INR18650-4S1P pack so it seats in the same bay without modification.
How can I confirm the 14.4 V 2600 mAh pack is delivering full capacity after the first few charges?
Run two or three complete charge–discharge cycles; the built-in decoded chip then reports true capacity to the device’s battery gauge just like the factory unit.
Does the box include a charger or only the 191.0 g lithium-polymer battery?
Only the battery is included; you reuse your existing Dustin charger.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
