Cameron Sino Battery for Datalogic Falcon X3/X4 5200mAh 3.7V BT-26
Replacement lithium-ion pack rated 5200mAh at 3.7V for Datalogic Falcon X3 and X4 barcode scanners
- Specifications79.00 x 41.16 x 24.55
- Typelithium_ion
- Battery Pack79.00 x 41.16 x 24.55
- Battery Typelithium_ion
- Battery Capacity5200mAh / 19.24Wh
- Battery Voltage3.7 volts
- 5200mAh capacity extends scanner runtime
- 7V lithium-ion chemistry matches original spec
- 00 x 41.16 x 24.55mm fits Falcon X3, X3 Plus, X3+, X4
- ISO9001, RoHS, CE certified for safety compliance
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection
Replacement battery for Datalogic Falcon X3 and X4
This lithium-ion pack replaces the original power cell in Datalogic Falcon X3, Falcon X3 Plus, Falcon X3+ and Falcon X4 barcode scanners. It delivers a 5200mAh capacity at 3.7 volts and matches the factory dimensions of 79.00 x 41.16 x 24.55 mm. The pack weighs 120.0 g and includes a fully decoded chip that communicates with the scanner exactly like the original unit.
Thermals noise and power draw in normal use
The battery operates at the standard 3.7 V nominal voltage for lithium-ion chemistry and stores 19.24 Wh of energy. Internal protection circuitry guards against overcharge, over-discharge, over-voltage and short-circuit conditions during daily scanning workloads. No active cooling or fan is present, so the pack adds no audible noise to the scanner.
Bundled accessories and software impact
The package includes shock-absorbing foam that protects the cell during transit and handling before installation. Installation can be completed by following publicly available video guides, requiring no proprietary tools or software updates. The unit carries ISO 9001, RoHS and CE certifications and is backed by a 12-month warranty period with a 30-day money-back option.
Highlights
- 5200mAh capacity extends scanner runtime
- 7V lithium-ion chemistry matches original spec
- 00 x 41.16 x 24.55mm fits Falcon X3, X3 Plus, X3+, X4
- ISO9001, RoHS, CE certified for safety compliance
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Falcon X3, Falcon X3 Plus, Falcon X3+, Falcon X4 |
| Part Number | 4ACC0046, 94ACC1386, BT-0016, BT-26 |
| Specifications | 79.00 x 41.16 x 24.55 |
| Type | lithium_ion |
| Battery Pack | 79.00 x 41.16 x 24.55 |
| Battery Type | lithium_ion |
| Battery Capacity | 5200mAh / 19.24Wh |
| Battery Voltage | 3.7 volts |
Questions about this item
How do I install the 5200mAh battery into my Falcon X3 Plus and which step is often missed?
Power off the scanner, remove the battery latch, slide the 79.00 x 41.16 x 24.55mm pack into the compartment until the connector seats firmly, then relatch; the step most users skip is verifying the decoded chip initialises on first boot.
What maintenance or replacement will the 3.7V lithium-ion pack need over time?
Expect gradual capacity fade after several hundred charge cycles; no user-serviceable parts exist, so plan to replace the entire 19.24Wh unit when runtime drops below your shift requirements.
What limit appears first during continuous barcode scanning with this 120.0g battery?
Thermal throttling of the scanner's radio module typically triggers before the pack hits its over-discharge protection, forcing a cool-down pause during high-duty sessions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
