Cameron Sino Battery for Crestron TST-600 TST-602 3200mAh 11.84Wh
Replacement battery for Crestron TST-600 and TST-602 touchpanels, 3200mAh capacity
- Specifications102.00 x 14.70 x 14.20
- Battery Pack102.00 x 14.70 x 14.20
- Battery Capacity3200 milliamp_hours
- Direct replacement for Crestron TST-600 and TST-602 touchpanels
- 3200 mAh capacity delivers 11.84 Wh of runtime
- Slim 102.00 x 14.70 x 14.20 mm form factor fits original bay
- Rechargeable lithium-ion cell with built-in protection circuits
- Manufactured by Cameron Sino to ISO 9001, RoHS and CE standards
Replacement battery for Crestron touchpanels
This rechargeable lithium-ion pack is built for Crestron TST-600 and TST-602 touchpanels. It matches the original LI-CRXCRST1S4P part number and the TST-600-BTP reference. Installers and facility managers use it to restore runtime on wall-mounted or tabletop control units.
3200 mAh capacity with 11.84 Wh energy rating
The cell delivers 3200 milliampere-hours at a nominal 3.7 volts, giving 11.84 watt-hours of usable energy. That headroom supports extended daily operation in always-on control scenarios. Runtime drops when the panel drives bright backlights or continuous network polling, so heavy-use environments will see shorter cycles.
Direct swap for aged or swollen original packs
The battery fits the same 102.00 by 14.70 by 14.20 millimetre footprint as the factory unit, so no enclosure modification is needed. It replaces packs that no longer hold charge after years of trickle charging. The jump is worth it when the touchpanel shuts down unexpectedly or shows rapid percentage loss during normal use.
Highlights
- Direct replacement for Crestron TST-600 and TST-602 touchpanels
- 3200 mAh capacity delivers 11.84 Wh of runtime
- Slim 102.00 x 14.70 x 14.20 mm form factor fits original bay
- Rechargeable lithium-ion cell with built-in protection circuits
- Manufactured by Cameron Sino to ISO 9001, RoHS and CE standards
Specifications
| Brand | cameron sino |
|---|---|
| Model | Crestron TST-600 TST-602 TST-600 Touchpanels TST-602 Touchpanels |
| Part Number | Crestron TST-600-BTP LI-CRXCRST1S4P |
| Specifications | 102.00 x 14.70 x 14.20 |
| Battery Pack | 102.00 x 14.70 x 14.20 |
| Battery Capacity | 3200 milliamp_hours |
Questions about this item
Will this 3200 mAh battery fit the Crestron TST-600 and TST-602 touchpanels I already use?
Yes, the part numbers Crestron TST-600-BTP and LI-CRXCRST1S4P are listed as direct replacements for both TST-600 and TST-602 models.
How can I confirm the new battery is working correctly after I install it?
After fitting, run two or three full charge and discharge cycles; the pack should then hold its rated 11.84 Wh capacity and show normal runtime on the touchpanel.
What comes in the box and is anything else needed to use it?
The package contains one rechargeable 3200 mAh battery with protective foam; no extra cables or chargers are required — just reuse the touchpanel's existing charger.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



