Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.01002461BTC
In stock
Cameron Sino Battery for Climet CI-150 CI-453 CI-454 7600mAh 9.6V
Replacement lithium-polymer battery for Climet CI-150, CI-453 and CI-454 particle counters, 7600mAh at 9.6V
- Specifications135.30 x 135.30 x 18.00
- Typelithium_polymer
- Battery Pack135.30 x 135.30 x 18.00
- Battery Typelithium_polymer
- Battery Capacity7600.00 milliamp_hours
- Battery Voltage9.60 volts
- 7600 mAh capacity powers the Climet CI-150, CI-453 and CI-454 particle counters for extended field use
- 6 V lithium-polymer chemistry matches the original 31065135 specification for direct replacement
- ISO 9001, RoHS and CE certification confirms manufacturing quality and safety compliance
- Built-in over-charge, over-discharge, over-voltage and short-circuit protection safeguards the pack during operation
- Compact 135.30 × 135.30 × 18.00 mm form factor fits the instrument battery bay without modification
Replacement Battery for Climet Particle Counters
This lithium-polymer pack replaces the original power source in Climet CI-150, CI-453 and CI-454 particle counters. It is built to the same electrical and mechanical specification as the factory cell and includes a fully decoded chip for direct communication with the instrument. The pack is certified to ISO9001, RoHS and CE standards and ships in shock-absorbing foam for transit protection.
Voltage and Connector Compatibility
The pack delivers 9.6 volts and uses the original connector layout, so it fits only devices that accept the Climet 31065135 part number. Buyers must verify the model number on their instrument and the part number on the existing battery before purchase, as an incorrect match will prevent installation or cause the counter to reject the pack.
Capacity and Runtime Headroom
Rated at 7600 milliamp-hours and 72.96 watt-hours, the cell supports extended indoor or outdoor sampling sessions between charges. Performance peaks after two or three full charge-discharge cycles. Users who need longer continuous operation than a single pack provides, or who operate equipment that draws more current than the original design allows, will find the capacity insufficient.
Highlights
- 7600 mAh capacity powers the Climet CI-150, CI-453 and CI-454 particle counters for extended field use
- 6 V lithium-polymer chemistry matches the original 31065135 specification for direct replacement
- ISO 9001, RoHS and CE certification confirms manufacturing quality and safety compliance
- Built-in over-charge, over-discharge, over-voltage and short-circuit protection safeguards the pack during operation
- Compact 135.30 × 135.30 × 18.00 mm form factor fits the instrument battery bay without modification
Specifications
| Brand | cameron sino |
|---|---|
| Model | Climet CI-150 Particle Counter CI-453 CI-454 |
| Part Number | Climet 31065135 |
| Specifications | 135.30 x 135.30 x 18.00 |
| Type | lithium_polymer |
| Battery Pack | 135.30 x 135.30 x 18.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 7600.00 milliamp_hours |
| Battery Voltage | 9.60 volts |
Questions about this item
How long will the 7600mAh capacity run a Climet CI-150 particle counter?
The 7600mAh pack stores 72.96Wh at 9.6V; actual run time depends on the counter's current draw, which varies by sampling mode and display brightness.
Does the battery use a standard connector or a proprietary Climet interface?
It is built to the exact specifications of Climet part 31065135 with a fully decoded chip, so the original connector mates directly without adapters.
Will the 135.30 x 135.30 x 18.00mm pack fit the CI-453 and CI-454 battery compartments?
Yes, those dimensions match the original battery for all three listed models, so it seats in the same cavity and latch points.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
