Cameron Sino Battery for CardinalHealth Alaris GH Asena GS-GH 2500mAh 7.2V
Replacement battery for CardinalHealth Alaris GH and Asena GS-GH syringe pumps, 2500mAh 7.2V with ISO9001, RoHS and CE certification
- Specifications50.48 x 50.40 x 47.00
- Battery Pack50.48 x 50.40 x 47.00
- Battery Capacity2500 milliamp_hours
- Battery Voltage7.2 volts
- Replacement battery for Alaris GH and Asena GS-GH syringe pumps
- 2500 mAh capacity delivers 18.00 Wh runtime at 7.2 volts
- Certified to ISO 9001, RoHS and CE for medical use
- 48 x 50.40 x 47.00 mm form factor fits original compartment
- Built-in protection against overcharge, over-discharge and short circuit
Compatible Replacement Battery
This Cameron Sino battery replaces the original power pack in CardinalHealth Alaris GH and Asena GS-GH syringe pumps. It matches the OEM part numbers 1000SP01080 and 1000SP01122 for direct compatibility. The 2500mAh capacity at 7.2V delivers 18.00Wh of energy for clinical use.
Electrical and Physical Limits
The pack operates at 7.2 volts with a rated capacity of 2500 milliampere-hours. Physical dimensions are 50.48 by 50.40 by 47.00 millimetres and the unit weighs 217.8 grams. A fully decoded chip communicates with the pump exactly as the original battery does.
Pre-Installation Checks
Verify the device model and the original battery part number before ordering to ensure correct fit. The connector must be seated properly during installation. Allow two to three full charge and discharge cycles for the new cell to reach optimal performance. Avoid chargers not approved for medical equipment.
Highlights
- Replacement battery for Alaris GH and Asena GS-GH syringe pumps
- 2500 mAh capacity delivers 18.00 Wh runtime at 7.2 volts
- Certified to ISO 9001, RoHS and CE for medical use
- 48 x 50.40 x 47.00 mm form factor fits original compartment
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Alaris Asena Syringe Pump CC, Alaris Asena Syringe Pump GH, Alaris Asena Syringe Pump PK |
| Part Number | 1000SP01080, 1000SP01122, 100SP01122 |
| Specifications | 50.48 x 50.40 x 47.00 |
| Battery Pack | 50.48 x 50.40 x 47.00 |
| Battery Capacity | 2500 milliamp_hours |
| Battery Voltage | 7.2 volts |
Questions about this item
Which part number matches my Alaris GH or Asena GS-GH pump?
This battery replaces CardinalHealth part numbers 1000SP01080 and 1000SP01122, and fits the Alaris GH, Asena GS-GH models listed.
What runtime can I expect from the 2500mAh 7.2V pack in a syringe pump?
The 18.00Wh capacity typically provides several hours of continuous infusion; actual run time depends on pump settings and alarm usage.
Does the battery use a proprietary connector or a standard interface?
It uses the original equipment connector for Alaris GH and Asena GS-GH pumps; the fully decoded chip communicates with the device exactly like the factory pack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



